English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Персонал и оборудование для дезактивации материалов
Мобильный ионизирующий персонал Blow-Off Portal
A doorless ionising blow-off portal on a lockable mobile base for flexible personnel treatment at temporary clean zones and changing work cells.
- Doorless Mobile Portal
- Lockable Wheeled Base
- Ionising Blow-Off Air
- Rapid Work-Cell Relocation
Введение продукции
This mobile unit is a doorless open ionising pass-through portal, not a wheeled enclosed air-shower booth. Side housings carry ionising blow-off heads and the compact air equipment, while a bridged frame remains open for personnel to walk through. Locking castors, forklift provisions or adjustable feet allow the portal to be moved between indoor work cells and stabilised for use without permanent floor fixing.
Основные характеристики
A rigid mobile base carries the complete frame for short-distance relocation.
Locking castors and levelling feet help stabilise the unit before operation.
Ionising blow-off heads can be directed toward garment and equipment surfaces.
A detachable connection boot can align the portal with a temporary partition when required.
Обеспокоенность клиентов продуктами
A mobile static-control station must move easily between work cells while remaining stable, open and practical during personnel use.
Temporary work cells do not justify a fixed static-control installation.The self-supporting portal can be relocated between indoor production areas.
A wheeled frame can move or twist while people pass through it.Locking castors and adjustable levelling feet stabilise the base in its operating position.
Static-control equipment is difficult to reconfigure when a temporary line moves.The integrated mobile frame retains the ionising heads and compact air equipment as one unit.
A temporary clean partition needs a neat interface around the treatment point.An optional flexible connection boot can close the gap to a compatible partition opening.
Типичные приложения
Pilot production clean zonesTemporary electronics assembly cellsRelocatable laboratory areasEquipment installation projects
Технические параметры
Typical construction ranges for a doorless mobile ionising blow-off portal are listed below.
| Основной материал | Powder-coated steel or aluminium portal frame on a reinforced mobile base with ionising blow-off heads and serviceable inlet filtration |
|---|---|
| Толщина панели | 1.0-1.2 mm equipment-side housing panels |
| эффективная ширина | 800-1000 mm clear doorless passage width |
| Максимальная длина | Up to 1600 mm overall mobile portal span |
| Толщина линий стали | 1.0-1.2 mm formed steel casing over the mobile support frame |
| Плотность ядра | 30-45 kg/m³ acoustic PET-fibre infill in the blower housings |
| Теплопроводимость | 0.034-0.040 W/(m·K) for the acoustic housing infill |
| Поверхностная отделка | White powder-coated frame with stainless nozzle faces and lockable dark-grey castors |
| Объединенный тип | Bolted portal-frame joints on a lockable wheeled base with removable equipment covers |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Lockable castors or forklift pocketsAC or pulsed-DC ionisationFlexible partition connection bootDetachable access ramp
Planning a Mobile Ionizing Personnel Blow-Off Portal specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
