Mobile stainless cleanroom workbench on four locking casters

Мебель для чистых комнат и изделия из нержавеющей стали

Мобильный рабочий стол в чистых помещениях

A rigid stainless workbench on low-shedding locking casters for relocating tools and temporary process stations within controlled areas.

Low-shedding swivel casters
Two positive wheel brakes
Integrated push handles
Fully welded stainless top

Запрос котировки Просмотреть продукты

Введение продукции

The mobile cleanroom workbench adds controlled mobility to a welded stainless work platform. Large cleanroom-compatible polyurethane or phenolic wheels roll over floor joints with less vibration than small industrial casters. Two braked swivel casters secure the table during work, while a tubular push handle keeps hands away from equipment. Raised wheel forks and an open lower frame remain visible and accessible during sanitation.

Основные характеристики

Large-diameter cleanroom casters reduce rolling shock transferred to instruments on the worktop.

Opposed wheel brakes restrain both rotation and swivel while the station is in use.

An integrated handle provides a defined push point without touching the work surface or equipment.

Open caster forks and radiused frame tubes expose wheel areas for inspection and cleaning.

Обеспокоенность клиентов продуктами

Improvised mobile tables often roll during use, shed from unsuitable wheels or transmit floor shock to sensitive equipment.

Small hard wheels chatter across cleanroom floor seams.Larger polyurethane or phenolic wheels reduce impact and rolling vibration.

A cart without a defined handle is pushed by its sanitary worktop.The welded rear handle separates manoeuvring contact from the process surface.

Single-wheel brakes allow the opposite end to pivot during work.Two diagonally positioned total-lock casters stabilize the complete bench.

Covered caster housings conceal hair and wiping debris.Open stainless forks keep wheel treads and axles visible for sanitation.

Типичные приложения

Temporary assembly stationsMobile inspection setupsBatch changeover supportEquipment maintenance stagingCleanroom line balancing

Технические параметры

Typical configurable specifications for a mobile cleanroom workbench are listed below.

Основной материал	Solid Type 304 stainless steel worktop and welded mobile frame
Толщина панели	1.2–2.0 mm reinforced worktop skin
эффективная ширина	600–800 mm work surface depth
Максимальная длина	2000 mm
Толщина линий стали	1.2–2.0 mm stainless steel
Плотность ядра	7900–8000 kg/m³ solid stainless steel
Теплопроводимость	14–16 W/(m·K) for austenitic stainless steel
Поверхностная отделка	Brushed No. 4 or electropolished stainless steel
Объединенный тип	Continuous welded frame with bolted sealed-stem cleanroom casters
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

100 or 125 mm polyurethane castersFour total-lock castersRemovable lower shelfConductive ESD wheel package

Planning a Mobile Cleanroom Workbench specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой