English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Оборудование для чистых помещений
Коробка медицинского пропуска
A wall-mounted static 316L stainless transfer chamber with opposing electromagnetic interlocked doors, observation windows and clear door-status indication.
- 316L Coved Chamber
- Opposing Interlocked Doors
- Dual Observation Windows
- Red-Green Door Status
Введение продукции
The medical pass box is a straight-through static transfer chamber for moving packaged supplies and small clinical materials between adjacent controlled rooms without routine personnel passage. Its double-wall 316L stainless shell encloses the interlock components away from the cleanable chamber, while continuously joined internal surfaces and coved corners reduce ledges around the transfer path. Matching hinged doors on both sides use tempered-glass windows, compression gaskets and an electromagnetic interlock so only one side is released at a time. A simple front control switch and red-green indicators give operators an immediate local view of door status without adding an airflow or filtration module.
Основные характеристики
The 316L stainless interior uses smooth welded transitions and coved corners for accessible wipe-down cleaning.
Equal glazed windows let staff confirm chamber occupancy before operating either door.
A double-wall shell isolates lock hardware from the unobstructed transfer compartment.
Обеспокоенность клиентов продуктами
Medical material transfer must limit unnecessary room entry while keeping the chamber observable, cleanable and unambiguous to operators on both sides.
Opening both sides together can create a direct path between rooms with different pressure or cleanliness conditions.The opposing electromagnetic locks allow one door to be released while retaining the other door closed.
Frequent disinfectant wiping can expose seams, ledges and mild materials to staining or residue accumulation.A 316L stainless chamber with continuous joints and coved internal transitions provides a corrosion-resistant accessible surface.
Staff may operate a hatch without knowing whether material remains inside or the opposite side is active.Matching observation windows and red-green status lamps provide visual confirmation before each transfer step.
Interlock parts projecting into the chamber create hard-to-reach cleaning points.The double-wall enclosure keeps the lock mechanism outside the unobstructed transfer compartment.
Типичные приложения
Surgical-suite supply transferHospital pharmacy clean areasClinical laboratory support roomsCentral sterile service interfaces
Технические параметры
Typical configurable construction values for a wall-mounted static 316L medical pass box are listed below.
| Основной материал | Double-wall AISI 316L stainless steel chamber and doors with tempered-glass windows, silicone gaskets and electromagnetic locks |
|---|---|
| Толщина панели | 50-90 mm double-wall shell and door section |
| эффективная ширина | 450-750 mm clear transfer chamber width |
| Максимальная длина | Up to 1000 mm configurable clear chamber depth |
| Толщина линий стали | 1.0-1.5 mm AISI 316L stainless sheet |
| Плотность ядра | 8000 kg/m³ for AISI 316L stainless steel |
| Теплопроводимость | 15 W/(m·K) for AISI 316L stainless steel at room temperature |
| Поверхностная отделка | Neutral satin brushed 316L stainless steel with smooth welds and coved internal corners |
| Объединенный тип | Continuously joined double-wall chamber with gasketed opposing hinged doors and electromagnetic interlock |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Application-selected clear chamber dimensionsSatin brushed or electropolished 316L internal finishFixed and removable wall-flange arrangementsMechanical interlock for non-powered installations
Planning a Medical Pass Box specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
