English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
УФУ и терминальное оборудование для очистки воздуха
Контрольная панель Группы FFU
A compact wall panel that gives one cleanroom zone coordinated start, stop, speed presets and fault indication without requiring a full central-control cabinet.
- Dedicated Zone Operation
- Group Speed Presets
- Local Fault Indication
- Compact Wall Enclosure
Введение продукции
The FFU group control panel operates a defined group of EC fan filter units serving one room or process zone. A small touchscreen or selector interface provides common start/stop and preset airflow levels, while addressable communication or isolated analogue outputs deliver commands to the connected fans. Status lamps and a summary alarm relay show whether the group is available without exposing the complexity of a facility-wide supervisory system. The panel can work independently or report its group state upward to a central controller.
Основные характеристики
Preset production, standby and boost modes reduce repeated manual adjustment.
A local summary alarm identifies communication or fan failure within the controlled group.
Compact low-voltage construction suits wall mounting near the served cleanroom.
Обеспокоенность клиентов продуктами
A small FFU zone needs coordinated operation and fault visibility, but a large central cabinet can be disproportionate to the number of connected units.
Individual wall switches leave adjacent FFUs running at mismatched speeds.A shared group setpoint sends the same operating command to every fan in the zone.
Operators cannot tell whether a stopped unit is disabled or has a communication fault.Separate run and alarm indications distinguish normal standby from abnormal loss of feedback.
A small room cannot justify the space and wiring of a full supervisory cabinet.The compact wall enclosure combines low-voltage control, group display and field terminals.
Future central monitoring would require replacing the original local controls.An optional network port allows the group panel to become a subordinate zone node.
Типичные приложения
Single cleanroom FFU zonesModular laboratory suitesClean booths and mini-environmentsGowning-room ceiling groupsIndependent production cells
Технические параметры
Typical enclosure and control ranges for an FFU group control panel are shown below.
| Основной материал | Compact PLC or group controller with 24 VDC supply, zone HMI, alarm relay and isolated EC fan interfaces |
|---|---|
| Толщина панели | 120-200 mm wall-enclosure depth |
| эффективная ширина | 300-500 mm nominal panel width |
| Максимальная длина | Up to 600 mm enclosure height |
| Толщина линий стали | 1.2-1.5 mm powder-coated steel enclosure and removable gland plate |
| Плотность ядра | Approximately 1800-1900 kg/m³ nominal density of the FR-4 substrate used in the group control panel |
| Теплопроводимость | Approximately 0.25-0.40 W/(m·K) through the group-panel FR-4 control substrate |
| Поверхностная отделка | Cleanroom-white powder coat with flush dark HMI window and blue-green status indicators |
| Объединенный тип | Gasketed wall enclosure with detachable terminal blocks and RS-485 or isolated 0-10 V field connections |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Touchscreen or selector-switch interfaceHardwired 0-10 V or addressable fan networkSummary alarm relayModbus subordinate connection
Planning a FFU Group Control Panel specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
