Enclosed stainless cleanroom material cart with blue bumpers and double doors

Мебель для чистых комнат и изделия из нержавеющей стали

Корзина материалов для чистых помещений

An enclosed Type 304 stainless transfer cart with gasketed double doors, adjustable internal shelves, positive latches, blue corner bumpers and four locking polyurethane casters.

Fully enclosed load compartment
Compression-gasketed double doors
Height-adjustable internal shelves
Blue perimeter impact protection

Запрос котировки Просмотреть продукты

Введение продукции

The cleanroom material cart shields wrapped components and sealed production supplies while they move through controlled corridors. Its fully welded Type 304 case has a smooth interior with three height-adjustable solid shelves and removable blue retaining rails. Two front doors close against a continuous blue silicone gasket using over-center compression latches, reducing direct exposure to corridor dust without presenting the cart as an airtight chamber. Blue corner bumpers protect wall finishes, while a rear tubular handle and four 150 mm polyurethane casters control a loaded cart.

Основные характеристики

The enclosed welded body prevents wrapped materials from being directly exposed on an open shelf during transfer.

Continuous blue silicone door seals are compressed by two positive latches and remain visible for inspection.

Three solid shelves relocate on enclosed stainless support tracks to suit cartons of different heights.

Full-height blue corner bumpers absorb low-speed contact before the stainless case reaches a wall panel.

Обеспокоенность клиентов продуктами

Sensitive materials can collect corridor fallout or shift inside a cart unless the load compartment is enclosed, the doors close consistently and shelves restrain mixed carton sizes.

Open carts expose wrapped stock to traffic-generated particles between controlled rooms.A fully enclosed welded case surrounds the load throughout movement.

Light doors rebound open when the cart crosses floor joints.Over-center latches compress the continuous gasket and positively retain both doors.

Fixed shelf spacing wastes space or forces unlike cartons onto one level.Enclosed support tracks allow all three shelves to be repositioned without protruding hardware.

A heavy cart damages wall panels when maneuvering around an airlock corner.Blue perimeter bumpers intercept low-height and vertical corner contact.

Типичные приложения

Wrapped component transferSterile-support material stagingClean packaging supply movementMedical-device kit transportControlled corridor replenishment

Технические параметры

Typical configurable specifications for an enclosed stainless cleanroom material cart are listed below.

Основной материал	Type 304 stainless welded enclosure, doors and shelves with blue silicone gaskets and polyurethane bumpers
Толщина панели	1.2 mm double-folded enclosure and door panels
эффективная ширина	900 mm clear internal storage width
Максимальная длина	1150 mm maximum overall cart length including rear handle and bumpers
Толщина линий стали	1.2 mm Type 304 external skin; 1.0 mm adjustable shelf sheet
Плотность ядра	7900–8000 kg/m³ for Type 304 stainless steel
Теплопроводимость	14–17 W/(m·K) for Type 304 stainless steel
Поверхностная отделка	Satin-brushed stainless interior and exterior with blue silicone seals, rails and corner bumpers
Объединенный тип	Fully welded sealed case with compression-gasketed double doors, adjustable shelf tracks and bolted caster plates
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Type 316L stainless bodyPull-out wire shelvesTamper-evident door haspConductive caster package

Planning a Cleanroom Material Cart specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой