English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Одежда для чистых комнат, ИПП и расходные материалы
Маркер для чистых помещений
Capped fine-tip cleanroom marker with a low-particle white polymer barrel and permanent quick-drying black ink for labels and labware.
- Fine bullet tip for permanent controlled labeling
- Quick-drying alcohol-resistant black ink
- Smooth low-particle polymer barrel and fitted cap
Введение продукции
The Cleanroom Marker provides a broader, more surface-compatible mark than a ballpoint pen while retaining a controlled polymer construction. Its fine bullet nib writes on cleanroom paper, labels, plastic bags, glass, metal and disposable labware. Permanent quick-drying ink resists routine water and alcohol exposure, and the fitted cap protects the fiber tip between uses.
Основные характеристики
Alcohol-based ink dries quickly to reduce smearing
High-density polymer barrel limits loose components
Fitted cap maintains nib condition and prevents unintended marking
Irradiated and non-irradiated packaging options support different zones
Обеспокоенность клиентов продуктами
Controlled labeling often includes nonporous bags, trays and equipment tags that a ballpoint cannot mark reliably. Marker ink must dry quickly without compromising the facility's material and traceability controls.
Slow-drying ink can smear onto gloves or adjacent labels.Use quick-drying permanent ink and allow the mark to set before handling.
A damaged fiber tip may produce an inconsistent broad line.Match fine or ultra-fine nib size to the required label area.
An uncapped marker may dry out or mark a work surface.Replace the fitted cap immediately after each marking operation.
Barrel printing can deteriorate under aggressive solvent wiping.Apply only approved wipe-down chemistry and avoid strong thinners.
Типичные приложения
Suitable for cleanroom labels, sample bags, plastic trays, glassware, metal tags, disposable labware, laminated forms, equipment identification and controlled production markings.
Технические параметры
The following ranges reflect common fine-tip cleanroom markers. Final nib size, ink color, irradiation status and package configuration should be confirmed for the labeling process.
| Основной материал | High-density polymer barrel with fiber bullet nib and permanent alcohol-based ink |
|---|---|
| Толщина панели | 1.0-2.0 mm barrel wall |
| эффективная ширина | 12-17 mm barrel diameter |
| Максимальная длина | 140 mm capped length |
| Толщина линий стали | 0 mm; no steel facing used |
| Плотность ядра | 900-1050 kg/m³ polymer barrel and cap |
| Теплопроводимость | 0.10-0.22 W/(m·K), polymer formulation dependent |
| Поверхностная отделка | Smooth white low-particle barrel with black fitted cap and fine bullet nib |
| Объединенный тип | Press-fit capped marker with retained porous ink reservoir and fiber tip |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Black, blue or red permanent ink0.2 mm ultra-fine or approximately 0.6 mm fine bullet tipWhite or black low-particle barrelCapped or retractable styleNon-irradiated or gamma-irradiated presentationIndividual double bagging for aseptic transfer
Planning a Cleanroom Marker specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
