English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
УФУ и терминальное оборудование для очистки воздуха
Фильтры вентилятора переменного тока
A cost-conscious FFU built around a permanent-split-capacitor AC motor, local speed adjustment and a replaceable high-efficiency filter module.
- PSC AC Induction Motor
- Local Rotary Speed Control
- Forward-Curved Blower Wheel
- Wide Voltage Configuration Range
Введение продукции
The AC fan filter unit uses a permanent-split-capacitor induction motor and forward-curved blower wheel to produce filtered supply air from a conventional single-phase circuit. A local rotary controller adjusts motor voltage for commissioning and periodic rebalance, while the accessible junction box keeps mains connections separate from the filter chamber. The mechanically simple drive is suitable where individual unit control and economical replacement are preferred over digital networking.
Основные характеристики
A guarded rotary potentiometer permits local airflow trimming without software or a communication network.
The forward-curved wheel develops useful pressure at moderate rotational speed in a compact top-mounted scroll.
A separate terminal enclosure keeps line-voltage connections away from the clean-air path.
Обеспокоенность клиентов продуктами
An AC FFU is often selected for straightforward local operation, so the design must balance first cost, controllability and service access.
A fixed-speed AC blower supplies too much air to one ceiling bay and makes system balancing difficult.A dedicated rotary speed controller lets the commissioning technician trim each PSC motor independently.
Line-voltage wiring installed beside the filter seal complicates service and risks damaging the gasket.A top-mounted junction box provides a clear cable gland and terminal area outside the filter interface.
High motor speed can create an objectionable tonal sound above occupied workstations.A correctly sized forward-curved wheel reaches the required face velocity at a moderate operating point.
Replacing an entire proprietary control board extends downtime for a simple fan fault.The conventional PSC motor, capacitor and analog speed controller can be inspected as separate service components.
Типичные приложения
Small independent cleanroomsRetrofit ceiling bays with local controlsCompounding support areasLaboratory clean benches and enclosuresFacilities standardizing on conventional AC maintenance parts
Технические параметры
Representative dimensions and materials for a locally controlled PSC-motor AC fan filter unit are shown below.
| Основной материал | Galvanized-steel plenum, PSC AC motor, forward-curved centrifugal wheel and micro-glass HEPA or ULPA filter |
|---|---|
| Толщина панели | 320-420 mm overall module depth |
| эффективная ширина | 575-1170 mm nominal ceiling-grid width |
| Максимальная длина | Up to 1170 mm standard module length |
| Толщина линий стали | 0.8-1.2 mm galvanized-steel plenum and service panels |
| Плотность ядра | Approximately 85-115 kg/m³ nominal compacted density of the micro-glass final-filter pack |
| Теплопроводимость | Approximately 0.035-0.045 W/(m·K) for the dry final-filter pack installed in the AC-driven FFU |
| Поверхностная отделка | Natural passivated zinc interior with optional white powder-coated exterior and diffuser |
| Объединенный тип | Ceiling-grid flange with neoprene perimeter gasket and a compression-sealed removable filter frame |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
115, 208-230 or 277 V single-phase configurationForward-curved or backward-curved fan wheelLocal rotary or wall-mounted speed controllerBench-top or room-side replaceable filter
Planning a AC Fan Filter Unit specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
