Direct-expansion cooling coil with blue fins and copper distributor

Bilik Bersih HVAC dan Peralatan Pengendalian Udara

Gegelung penyejukan penyebaran langsung

A direct-expansion evaporator coil that boils refrigerant inside multiple copper circuits to cool and dehumidify cleanroom air.

Multi-Circuit Refrigerant Distribution
Direct Evaporative Cooling
Large Suction Header
Matched Condensing Unit Service

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

Liquid refrigerant enters a brass distributor and divides through small feeder tubes into multiple copper circuits. It evaporates as air crosses the fin pack, then returns through a large suction header to the remote condensing unit. Distributor sizing, circuit length and coil orientation are coordinated to keep all rows active across the expected load range and to return oil reliably.

Ciri-ciri Utama

A precision distributor divides two-phase refrigerant among equalized evaporator circuits.

Copper circuits and aluminum fins provide direct sensible and latent cooling without a secondary water loop.

A large suction header collects vapor at controlled velocity for stable superheat and oil return.

Independent or intertwined circuits can support staged compressors and part-load face coverage.

Kebimbangan Produk Pelanggan

DX coils depend on uniform refrigerant distribution and correctly matched circuits to prevent starving, flooding and temperature streaks.

Unequal feeder flow leaves some coil circuits inactive.A matched distributor and equal-length feeder tubes divide refrigerant across every circuit.

Low load causes unstable superheat and liquid carryover.Staged or intertwined circuits preserve active face area and stable expansion-valve control.

Long suction runs fail to return compressor oil.Header diameter, circuit velocity and piping traps are selected around the remote condensing unit.

Condensate carryover wets downstream filters.Coil face velocity, fin treatment and drain-pan geometry are coordinated for complete drainage.

Permohonan yang biasa

Remote-DX cleanroom air handlersPackaged make-up air unitsLaboratory environmental chambersMedical manufacturing HVACDedicated humidity-control systems

Parameter teknikal

Representative construction ranges for a multi-circuit cleanroom DX evaporator coil are listed below.

Bahan Teras	C12200 copper refrigerant tubes with aluminum fins, brass distributor and copper suction header
Ketebalan Panel	1.5-2.0 mm galvanized or stainless casing
Lebar berkesan	400-2800 mm active fin face width
Panjang maksimum	Up to 4000 mm overall coil casing length
Keluli Menghadapi Ketebalan	1.0-1.5 mm stainless drain pan where supplied
Ketumpatan teras	Approximately 8940 kg/m³ for the C12200 copper refrigerant-tube circuit
Kekonduksian Terma	Approximately 339 W/(m·K) for the C12200 copper DX refrigerant tubes at room temperature
Kemasan permukaan	Natural, blue hydrophilic or epoxy-coated aluminum fins
Jenis Bersatu	Brazed copper refrigerant circuits with flared or brazed distributor and suction connections
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Single, staged or intertwined refrigerant circuitsDifferent tube diameters and row countsHydrophilic or epoxy-coated finsStainless casing, drain pan and moisture eliminator

Planning a Direct-Expansion Cooling Coil specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami