Complete cleanroom wall base channel floor track

Dinding bilik bersih dan sistem siling

Saluran Asas Dinding Bilik Bersih

A galvanized-steel or aluminum floor track that locates modular cleanroom wall panels, transfers base loads and creates a level, sealable interface above the finished floor.

Level Panel Support
Direct Floor Anchorage
Sealed Base Interface
Demountable Wall Compatible

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

Cleanroom Wall Base Channel is the structural floor track beneath a modular wall run. The channel establishes panel alignment, restrains lateral movement at the base and distributes the wall load to the slab. Lightweight formed-steel versions provide a simple head-and-base track, while adjustable two-part aluminum systems can compensate for floor variation and create a flush recess for resilient or resin flooring. Mechanical anchors secure the lower section and hygienic sealant closes the floor and panel interfaces, leaving the visible room junction ready for coving or a recessed floor return.

Ciri-ciri Utama

A continuous track keeps the first wall course straight and controls panel position along the floor.

Mechanical floor anchors transfer base restraint independently of sealant adhesion.

Adjustable aluminum variants compensate for uneven slabs before wall panels are installed.

Recessed configurations accept a flush vinyl or resin floor cove without an exposed ledge.

Demountable wall panels can be removed while the base alignment system remains in place.

Kebimbangan Produk Pelanggan

The base channel must keep the wall level, accommodate the selected floor finish and remain sealed where the partition meets the slab.

An uneven slab causes cumulative panel misalignment higher in the wall.An adjustable base interface or controlled packing establishes a level bearing line before panels are set.

Sealant alone cannot safely restrain movement at the foot of a tall partition.Mechanical anchors secure the channel directly to the structural floor.

A projecting track creates a ledge beside sheet flooring.A recessed base detail receives the floor cove flush with the cleanroom wall face.

Cleaning liquid can enter through an unsealed floor-track joint.Continuous sealant beneath the track and along the panel interface closes both leakage paths.

Permohonan yang biasa

Modular cleanroom wall foundationsPharmaceutical partition basesModular laboratory partition foundationsFood-production hygienic wallsSemiconductor cleanroom enclosures

Parameter teknikal

Typical cleanroom wall base channel construction ranges are shown below.

Bahan Teras	6063 aluminum extrusion or formed galvanized/stainless steel
Ketebalan Panel	0.5–2.5 mm channel wall thickness
Lebar berkesan	50, 75 or 100 mm panel seat width
Panjang maksimum	3000–6000 mm per section
Keluli Menghadapi Ketebalan	0.5–1.0 mm for formed steel channel; N/A for aluminum version
Ketumpatan teras	N/A — formed channel has no insulation core
Kekonduksian Terma	N/A — structural floor track, not an insulating panel
Kemasan permukaan	Galvanized, brushed stainless steel, anodized aluminum or powder-coated aluminum
Jenis Bersatu	Mechanically anchored floor track with sealed panel seat and flooring interface
Penyesuaian	Terdapat berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi

Pilihan yang boleh didapati

Fixed formed channelAdjustable two-part aluminum baseRecess for 2 mm vinyl flooringStainless steel or color-matched finish

Planning a Cleanroom Wall Base Channel specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami