Complete cleanroom wall base channel floor track

クリーンルームの壁と天井システム

クリーンルーム壁ベースチャンネル

A galvanized-steel or aluminum floor track that locates modular cleanroom wall panels, transfers base loads and creates a level, sealable interface above the finished floor.

Level Panel Support
Direct Floor Anchorage
Sealed Base Interface
Demountable Wall Compatible

見積もりリクエスト製品案内

商品紹介

Cleanroom Wall Base Channel is the structural floor track beneath a modular wall run. The channel establishes panel alignment, restrains lateral movement at the base and distributes the wall load to the slab. Lightweight formed-steel versions provide a simple head-and-base track, while adjustable two-part aluminum systems can compensate for floor variation and create a flush recess for resilient or resin flooring. Mechanical anchors secure the lower section and hygienic sealant closes the floor and panel interfaces, leaving the visible room junction ready for coving or a recessed floor return.

主要な特徴

A continuous track keeps the first wall course straight and controls panel position along the floor.

Mechanical floor anchors transfer base restraint independently of sealant adhesion.

Adjustable aluminum variants compensate for uneven slabs before wall panels are installed.

Recessed configurations accept a flush vinyl or resin floor cove without an exposed ledge.

Demountable wall panels can be removed while the base alignment system remains in place.

お客様の製品に関する懸念事項

The base channel must keep the wall level, accommodate the selected floor finish and remain sealed where the partition meets the slab.

An uneven slab causes cumulative panel misalignment higher in the wall.An adjustable base interface or controlled packing establishes a level bearing line before panels are set.

Sealant alone cannot safely restrain movement at the foot of a tall partition.Mechanical anchors secure the channel directly to the structural floor.

A projecting track creates a ledge beside sheet flooring.A recessed base detail receives the floor cove flush with the cleanroom wall face.

Cleaning liquid can enter through an unsealed floor-track joint.Continuous sealant beneath the track and along the panel interface closes both leakage paths.

典型的な用途

Modular cleanroom wall foundationsPharmaceutical partition basesModular laboratory partition foundationsFood-production hygienic wallsSemiconductor cleanroom enclosures

技術的なパラメータ

Typical cleanroom wall base channel construction ranges are shown below.

コア材料	6063 aluminum extrusion or formed galvanized/stainless steel
パネルの厚さ	0.5–2.5 mm channel wall thickness
有効幅	50, 75 or 100 mm panel seat width
最大長さ	3000–6000 mm per section
鋼鉄の厚さを直面する	0.5–1.0 mm for formed steel channel; N/A for aluminum version
コア密度	N/A — formed channel has no insulation core
熱伝導率	N/A — structural floor track, not an insulating panel
表面仕上げ	Galvanized, brushed stainless steel, anodized aluminum or powder-coated aluminum
ジョイントタイプ	Mechanically anchored floor track with sealed panel seat and flooring interface
カスタマイズ	目的のアプリケーションおよび動作環境に基づいて利用可能

利用可能なオプション

Fixed formed channelAdjustable two-part aluminum baseRecess for 2 mm vinyl flooringStainless steel or color-matched finish

Planning a Cleanroom Wall Base Channel specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する