Stainless cleanroom door position sensor and matching magnet set

Pintu Bilik Bersih, Windows dan Sistem Interlock

Sensor kedudukan pintu bilik bersih

A matched magnetic contact set that reports whether a cleanroom door leaf is physically aligned with the closed frame position.

Non-Contact Magnetic Sensing
Sealed Reed Contact
Dry-Contact Controller Output
Interlock Feedback

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The cleanroom door position sensor pairs a reed-switch module on the frame with a permanent magnet on the moving leaf. When the door closes and the two housings align within the sensing gap, the magnetic field changes the dry contact state sent to the interlock or access controller. Stainless or smooth white housings protect the encapsulated components, and the absence of a mechanical plunger removes a contact point from the clean opening.

Ciri-ciri Utama

Magnetic operation detects the closed position without physical contact between the two modules.

Encapsulated reed contacts resist contamination at the sensing element and require no exposed actuator.

Separate sensor and magnet housings accommodate frame-to-leaf movement across a controlled gap.

Dry-contact wiring integrates with interlocks, access panels and local door-status indicators.

Kebimbangan Produk Pelanggan

The control system must distinguish a physically closed door from one that is merely locked or moving through the frame.

A mechanical limit switch wears or traps residue where its plunger touches the door.The sealed reed and magnet sense alignment without mechanical contact.

Frame movement causes intermittent feedback when the sensing gap is too narrow.Matched surface or recessed housings provide a defined operating gap and adjustment range.

An interlock releases the opposite door before the first leaf has fully returned.The controller receives a dedicated closed-position contact from the aligned sensor pair.

Permohonan yang biasa

Cleanroom interlock feedbackAccess-controlled laboratory doorsAutomatic door closed-position inputPersonnel and material airlocks

Parameter teknikal

Typical dimensions and material data for a sealed cleanroom magnetic door contact are listed below.

Bahan Teras	Hermetically sealed reed capsule with copper-alloy contacts and ferrite permanent magnet
Ketebalan Panel	Approximately 12–25 mm housing depth
Lebar berkesan	Approximately 19–38 mm module width
Panjang maksimum	Approximately 110 mm for a long-range stainless sensor module
Keluli Menghadapi Ketebalan	0.8–1.2 mm brushed stainless-steel housing where selected
Ketumpatan teras	Approximately 4800–5100 kg/m³ for the ferrite magnet core
Kekonduksian Terma	Approximately 3–5 W/(m·K) for the ferrite magnet material
Kemasan permukaan	Brushed stainless steel or smooth white moulded polymer housing
Jenis Bersatu	Matched surface or recessed sensor-and-magnet pair aligned across a controlled gap
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Normally open, normally closed or changeover contactWhite polymer or stainless housingSurface or recessed mountingPrewired lead or screw-terminal connection

Planning a Cleanroom Door Position Sensor specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami