Stainless cleanroom door position sensor and matching magnet set

클린룸 도어, 창문 및 인터락 시스템

클린룸 도어 위치 센서

A matched magnetic contact set that reports whether a cleanroom door leaf is physically aligned with the closed frame position.

Non-Contact Magnetic Sensing
Sealed Reed Contact
Dry-Contact Controller Output
Interlock Feedback

견적 요청 제품 찾아보기

상품 소개

The cleanroom door position sensor pairs a reed-switch module on the frame with a permanent magnet on the moving leaf. When the door closes and the two housings align within the sensing gap, the magnetic field changes the dry contact state sent to the interlock or access controller. Stainless or smooth white housings protect the encapsulated components, and the absence of a mechanical plunger removes a contact point from the clean opening.

주요 기능

Magnetic operation detects the closed position without physical contact between the two modules.

Encapsulated reed contacts resist contamination at the sensing element and require no exposed actuator.

Separate sensor and magnet housings accommodate frame-to-leaf movement across a controlled gap.

Dry-contact wiring integrates with interlocks, access panels and local door-status indicators.

고객 제품 관심사

The control system must distinguish a physically closed door from one that is merely locked or moving through the frame.

A mechanical limit switch wears or traps residue where its plunger touches the door.The sealed reed and magnet sense alignment without mechanical contact.

Frame movement causes intermittent feedback when the sensing gap is too narrow.Matched surface or recessed housings provide a defined operating gap and adjustment range.

An interlock releases the opposite door before the first leaf has fully returned.The controller receives a dedicated closed-position contact from the aligned sensor pair.

일반적인 응용 프로그램

Cleanroom interlock feedbackAccess-controlled laboratory doorsAutomatic door closed-position inputPersonnel and material airlocks

기술 매개변수

Typical dimensions and material data for a sealed cleanroom magnetic door contact are listed below.

핵심 재료	Hermetically sealed reed capsule with copper-alloy contacts and ferrite permanent magnet
패널 두께	Approximately 12–25 mm housing depth
유효 폭	Approximately 19–38 mm module width
최대 길이	Approximately 110 mm for a long-range stainless sensor module
강철 면면 두께	0.8–1.2 mm brushed stainless-steel housing where selected
코어 밀도	Approximately 4800–5100 kg/m³ for the ferrite magnet core
열전도도 (Thermal Conductivity)	Approximately 3–5 W/(m·K) for the ferrite magnet material
표면 마무리	Brushed stainless steel or smooth white moulded polymer housing
접합 유형	Matched surface or recessed sensor-and-magnet pair aligned across a controlled gap
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Normally open, normally closed or changeover contactWhite polymer or stainless housingSurface or recessed mountingPrewired lead or screw-terminal connection

Planning a Cleanroom Door Position Sensor specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.