Three-quarter view of a blue washable synthetic pre-filter in an aluminum frame

エアフィルターと化学ろ過

Washable 合成の前フィルター

A resilient bonded-synthetic pad in a reusable metal frame for repeated coarse-dust capture, washing, drying and reinstallation.

Washable Bonded Media
Reusable Aluminum Frame
Resilient Open Fiber Matrix
Low-Waste Maintenance

見積もりリクエスト製品案内

商品紹介

The washable synthetic pre-filter uses a springy bonded polyester or resin-cured synthetic fiber pad held between protective screens in a rigid aluminum frame. The open, three-dimensional fiber matrix captures coarse airborne debris while recovering its thickness after normal washing and drying. Removable retainers allow damaged media to be replaced without discarding the frame. This construction suits accessible air-handling equipment where scheduled cleaning is practical and the operator wants to reduce disposable panel consumption.

主要な特徴

A thermally bonded fiber matrix resists slumping and springs back after careful washing.

Protective face screens prevent handling damage while leaving most of the media area open.

The extruded aluminum frame tolerates repeated removal and reinstallation in filter tracks.

Replaceable media and retaining clips extend the service life of the reusable frame assembly.

お客様の製品に関する懸念事項

A reusable filter only saves cost when its media survives cleaning and is returned completely dry, flat and correctly sealed.

Disposable coarse panels create high waste volume in dusty installations.A bonded synthetic pad can be removed, washed, dried and returned to its aluminum frame for multiple cycles.

Loose fibers shed from low-grade pads after rinsing or compressed-air cleaning.Thermally or resin-bonded synthetic fibers maintain a coherent matrix without an oily tackifier.

Wet media is reinstalled and transfers moisture into the air handler.The removable open pad drains readily and is dried completely before being placed back in service.

Repeated filter removal bends light frames and creates rack bypass.A rigid extruded aluminum perimeter and reinforced corners preserve the sealing plane.

典型的な用途

Washable AHU first-stage filtersFan-coil and packaged-unit returnsWorkshop and warehouse ventilationFresh-air louvers with service accessPrefiltration ahead of carbon or fine filters

技術的なパラメータ

Typical construction ranges for a framed washable synthetic pre-filter are listed below.

コア材料	Thermally bonded polyester or resin-bonded synthetic coarse-filter media
パネルの厚さ	25 or 50 mm nominal framed depth
有効幅	300-610 mm standard face width
最大長さ	Up to 1220 mm with intermediate screen support
鋼鉄の厚さを直面する	0.50-0.80 mm perforated aluminum or galvanized protective screen
コア密度	Approximately 35-60 kg/m³ bonded synthetic media bulk density
熱伝導率	Approximately 0.040-0.050 W/(m·K) for the dry polyester pad
表面仕上げ	Natural blue, green or black washable media with anodized or mill-finish aluminum frame
ジョイントタイプ	Replaceable pad retained between removable face screens in an extruded metal frame
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Polyester or rigid synthetic fiber mediaFlat or lightly pleated padAluminum, galvanized or stainless frameRemovable media retaining clips

Planning a Washable Synthetic Pre-Filter specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する