Three-quarter view of a blue washable synthetic pre-filter in an aluminum frame

공기 필터 및 화학 여과

세탁 가능한 합성 사전 필터

A resilient bonded-synthetic pad in a reusable metal frame for repeated coarse-dust capture, washing, drying and reinstallation.

Washable Bonded Media
Reusable Aluminum Frame
Resilient Open Fiber Matrix
Low-Waste Maintenance

견적 요청 제품 찾아보기

상품 소개

The washable synthetic pre-filter uses a springy bonded polyester or resin-cured synthetic fiber pad held between protective screens in a rigid aluminum frame. The open, three-dimensional fiber matrix captures coarse airborne debris while recovering its thickness after normal washing and drying. Removable retainers allow damaged media to be replaced without discarding the frame. This construction suits accessible air-handling equipment where scheduled cleaning is practical and the operator wants to reduce disposable panel consumption.

주요 기능

A thermally bonded fiber matrix resists slumping and springs back after careful washing.

Protective face screens prevent handling damage while leaving most of the media area open.

The extruded aluminum frame tolerates repeated removal and reinstallation in filter tracks.

Replaceable media and retaining clips extend the service life of the reusable frame assembly.

고객 제품 관심사

A reusable filter only saves cost when its media survives cleaning and is returned completely dry, flat and correctly sealed.

Disposable coarse panels create high waste volume in dusty installations.A bonded synthetic pad can be removed, washed, dried and returned to its aluminum frame for multiple cycles.

Loose fibers shed from low-grade pads after rinsing or compressed-air cleaning.Thermally or resin-bonded synthetic fibers maintain a coherent matrix without an oily tackifier.

Wet media is reinstalled and transfers moisture into the air handler.The removable open pad drains readily and is dried completely before being placed back in service.

Repeated filter removal bends light frames and creates rack bypass.A rigid extruded aluminum perimeter and reinforced corners preserve the sealing plane.

일반적인 응용 프로그램

Washable AHU first-stage filtersFan-coil and packaged-unit returnsWorkshop and warehouse ventilationFresh-air louvers with service accessPrefiltration ahead of carbon or fine filters

기술 매개변수

Typical construction ranges for a framed washable synthetic pre-filter are listed below.

핵심 재료	Thermally bonded polyester or resin-bonded synthetic coarse-filter media
패널 두께	25 or 50 mm nominal framed depth
유효 폭	300-610 mm standard face width
최대 길이	Up to 1220 mm with intermediate screen support
강철 면면 두께	0.50-0.80 mm perforated aluminum or galvanized protective screen
코어 밀도	Approximately 35-60 kg/m³ bonded synthetic media bulk density
열전도도 (Thermal Conductivity)	Approximately 0.040-0.050 W/(m·K) for the dry polyester pad
표면 마무리	Natural blue, green or black washable media with anodized or mill-finish aluminum frame
접합 유형	Replaceable pad retained between removable face screens in an extruded metal frame
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Polyester or rigid synthetic fiber mediaFlat or lightly pleated padAluminum, galvanized or stainless frameRemovable media retaining clips

Planning a Washable Synthetic Pre-Filter specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.