Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Filtres à air et filtration chimique
Préfiltre synthétique lavable
A resilient bonded-synthetic pad in a reusable metal frame for repeated coarse-dust capture, washing, drying and reinstallation.
- Washable Bonded Media
- Reusable Aluminum Frame
- Resilient Open Fiber Matrix
- Low-Waste Maintenance
Introduction de produit
The washable synthetic pre-filter uses a springy bonded polyester or resin-cured synthetic fiber pad held between protective screens in a rigid aluminum frame. The open, three-dimensional fiber matrix captures coarse airborne debris while recovering its thickness after normal washing and drying. Removable retainers allow damaged media to be replaced without discarding the frame. This construction suits accessible air-handling equipment where scheduled cleaning is practical and the operator wants to reduce disposable panel consumption.
Key Features
Protective face screens prevent handling damage while leaving most of the media area open.
The extruded aluminum frame tolerates repeated removal and reinstallation in filter tracks.
Replaceable media and retaining clips extend the service life of the reusable frame assembly.
Préoccupations du client produit
A reusable filter only saves cost when its media survives cleaning and is returned completely dry, flat and correctly sealed.
Disposable coarse panels create high waste volume in dusty installations.A bonded synthetic pad can be removed, washed, dried and returned to its aluminum frame for multiple cycles.
Loose fibers shed from low-grade pads after rinsing or compressed-air cleaning.Thermally or resin-bonded synthetic fibers maintain a coherent matrix without an oily tackifier.
Wet media is reinstalled and transfers moisture into the air handler.The removable open pad drains readily and is dried completely before being placed back in service.
Repeated filter removal bends light frames and creates rack bypass.A rigid extruded aluminum perimeter and reinforced corners preserve the sealing plane.
Les applications typiques
Washable AHU first-stage filtersFan-coil and packaged-unit returnsWorkshop and warehouse ventilationFresh-air louvers with service accessPrefiltration ahead of carbon or fine filters
Paramètres techniques
Typical construction ranges for a framed washable synthetic pre-filter are listed below.
| Matériaux de base | Thermally bonded polyester or resin-bonded synthetic coarse-filter media |
|---|---|
| Panneau épaisseur | 25 or 50 mm nominal framed depth |
| Largeur effective | Largeur de face standard 300 - 610 mm par |
| Longueur maximale | Up to 1220 mm with intermediate screen support |
| Acier face épaisseur | 0.50-0.80 mm perforated aluminum or galvanized protective screen |
| Densité Core | Approximately 35-60 kg/m³ bonded synthetic media bulk density |
| Conductivité thermique | Approximately 0.040-0.050 W/(m·K) for the dry polyester pad |
| surface finie | Natural blue, green or black washable media with anodized or mill-finish aluminum frame |
| Type joint | Replaceable pad retained between removable face screens in an extruded metal frame |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Polyester or rigid synthetic fiber mediaFlat or lightly pleated padAluminum, galvanized or stainless frameRemovable media retaining clips
Planning a Washable Synthetic Pre-Filter specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
