Three-quarter view of reinforced exhaust HEPA filter with dual faceguards

エアフィルターと化学ろ過

排気 HEPA フィルタ

A robust deep-box HEPA filter configured for cleanroom and laboratory exhaust systems, including front-access and bag-in/bag-out containment housings.

Containment Exhaust Duty
Deep Reinforced Pack
Two-Sided Face Protection
Housing-Compatible Gasket

見積もりリクエスト製品案内

商品紹介

The exhaust HEPA filter uses a deep glass-microfibre pack housed in a rigid galvanized-steel or stainless-steel box. Media separators and protective faceguards on both sides help the filter withstand turbulent extract air, maintenance handling and the controlled change procedure used in containment housings. Continuous polyurethane potting seals the pack edge, and a carefully positioned closed-cell gasket mates with front-access, side-access or bag-in/bag-out clamping frames. Optional high-capacity and incinerable configurations address different exhaust loading and disposal strategies.

主要な特徴

A reinforced metal box protects the filtration pack during removal through containment bags or glove-access housings.

Upstream and downstream faceguards shield the media from debris and accidental contact in exhaust service.

Deep-pleat or high-area mini-pleat configurations accommodate different airflow and dust-loading requirements.

Gasket placement can be matched to the knife-edge or sealing flange direction of the exhaust housing.

お客様の製品に関する懸念事項

Exhaust filters capture contaminants before discharge and must remain intact through loading, isolation and maintenance handling.

An exposed media face is damaged by debris entering the exhaust branch.Dual rigid faceguards protect both sides of the pack while preserving the open flow area.

A loaded filter deforms as it is pulled into a change-out bag.A reinforced metal box keeps the filter square and supports the media pack during controlled removal.

The gasket is installed on the wrong face for the containment housing clamp.Upstream, downstream or double-gasket arrangements are selected to match the housing seal plane.

Exhaust loading causes an unexpectedly rapid pressure rise.Deep-pleat or V-bank media area is selected according to extract airflow and anticipated aerosol burden.

典型的な用途

Laboratory containment exhaustPharmaceutical process extract systemsHospital isolation-room exhaustCytotoxic preparation facilitiesBag-in/bag-out filter housings

技術的なパラメータ

Typical construction ranges for a cleanroom exhaust HEPA filter are shown below.

コア材料	Water-resistant glass-microfibre HEPA media in deep-pleat or high-area mini-pleat construction
パネルの厚さ	150 — 292 mm フィルター深度
有効幅	305 — 610 mm 公称面幅
最大長さ	Up to 762 mm nominal face height
鋼鉄の厚さを直面する	0.8–1.2 mm galvanized-steel or stainless-steel box frame
コア密度	Approximately 40–65 kg/m³ equivalent packed-media density
熱伝導率	Approximately 0.035–0.045 W/(m·K) for the dry glass-microfibre pack
表面仕上げ	Mill-galvanized or brushed stainless-steel frame with two protective faceguards
ジョイントタイプ	Upstream, downstream or double closed-cell gasket for containment-housing clamping
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

H13 or H14 efficiencySeparator-style, mini-pleat or V-bank media packGalvanized or stainless-steel constructionSingle gasket, double gasket or gel-seal interface

Planning a Exhaust HEPA Filter specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する