Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Luftfilter und chemische Filtration
Abgas-HEPA - Filter
A robust deep-box HEPA filter configured for cleanroom and laboratory exhaust systems, including front-access and bag-in/bag-out containment housings.
- Containment Exhaust Duty
- Deep Reinforced Pack
- Two-Sided Face Protection
- Housing-Compatible Gasket
Produkteinführung
The exhaust HEPA filter uses a deep glass-microfibre pack housed in a rigid galvanized-steel or stainless-steel box. Media separators and protective faceguards on both sides help the filter withstand turbulent extract air, maintenance handling and the controlled change procedure used in containment housings. Continuous polyurethane potting seals the pack edge, and a carefully positioned closed-cell gasket mates with front-access, side-access or bag-in/bag-out clamping frames. Optional high-capacity and incinerable configurations address different exhaust loading and disposal strategies.
Key Features
Upstream and downstream faceguards shield the media from debris and accidental contact in exhaust service.
Deep-pleat or high-area mini-pleat configurations accommodate different airflow and dust-loading requirements.
Gasket placement can be matched to the knife-edge or sealing flange direction of the exhaust housing.
Kunden Produktbedenken
Exhaust filters capture contaminants before discharge and must remain intact through loading, isolation and maintenance handling.
An exposed media face is damaged by debris entering the exhaust branch.Dual rigid faceguards protect both sides of the pack while preserving the open flow area.
A loaded filter deforms as it is pulled into a change-out bag.A reinforced metal box keeps the filter square and supports the media pack during controlled removal.
The gasket is installed on the wrong face for the containment housing clamp.Upstream, downstream or double-gasket arrangements are selected to match the housing seal plane.
Exhaust loading causes an unexpectedly rapid pressure rise.Deep-pleat or V-bank media area is selected according to extract airflow and anticipated aerosol burden.
Typische Anwendungen
Laboratory containment exhaustPharmaceutical process extract systemsHospital isolation-room exhaustCytotoxic preparation facilitiesBag-in/bag-out filter housings
Technische Parameter
Typical construction ranges for a cleanroom exhaust HEPA filter are shown below.
| Core Material | Water-resistant glass-microfibre HEPA media in deep-pleat or high-area mini-pleat construction |
|---|---|
| Panel Dicke | Gesamtfiltertiefe 150 - 292 mm |
| Effektive Breite | 305 - 610 mm Nenngesichtbreite |
| Maximale Länge | Up to 762 mm nominal face height |
| Stahl facing Dicke | 0.8–1.2 mm galvanized-steel or stainless-steel box frame |
| Kerndichte | Approximately 40–65 kg/m³ equivalent packed-media density |
| Thermische Leitfähigkeit | Approximately 0.035–0.045 W/(m·K) for the dry glass-microfibre pack |
| Oberfläche Finish | Mill-galvanized or brushed stainless-steel frame with two protective faceguards |
| Gemeinsamer Typ | Upstream, downstream or double closed-cell gasket for containment-housing clamping |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Effizienz H13 oder H14Separator-style, mini-pleat or V-bank media packGalvanized or stainless-steel constructionSingle gasket, double gasket or gel-seal interface
Planning a Exhaust HEPA Filter specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
