Complete EPS insulated cleanroom panel with coated steel faces

クリーンルームの壁と天井システム

EPS 絶縁されたクリーンルームパネル

A lightweight and economical sandwich panel with an expanded-polystyrene core between coated steel facings, intended for dry general-purpose cleanroom walls and ceilings where moderate insulation and fast installation are required.

Lightweight EPS Core
Economical Insulation
Smooth Steel Surfaces
Fast Modular Installation

見積もりリクエスト製品案内

商品紹介

EPS Insulated Cleanroom Panels use molded expanded-polystyrene blocks bonded between profiled galvanized steel skins. The low-density core keeps panels light and delivers useful thermal separation for general indoor controlled areas. Smooth outer facings create the cleanable surface, while shaped joints align modules and reduce open gaps. EPS is best used where severe heat exposure, aggressive wash-down and high structural loading are not governing requirements. With protected edges and suitable reinforcement around openings, it provides a cost-efficient enclosure for many dry manufacturing and support spaces.

主要な特徴

Expanded polystyrene provides practical insulation at a low material and handling weight.

Large modules can be positioned quickly with modest lifting equipment.

Bonded steel skins add surface rigidity and protect the cellular foam core.

Factory-formed joints create predictable alignment across long interior wall runs.

The straightforward panel structure supports economical replacement and room reconfiguration.

お客様の製品に関する懸念事項

Correct use depends on protecting the foam, controlling heat exposure, reinforcing fixtures and keeping water out of panel edges.

EPS can be damaged when an exposed edge is struck or abraded.Metal closure profiles protect every perimeter and service opening from direct impact.

A lightweight core does not safely carry heavy wall-mounted equipment by itself.Solid inserts or independent supports transfer concentrated loads away from the foam.

High-temperature areas can exceed the suitable service range of EPS.EPS panels are assigned to ordinary dry interiors while mineral or PIR cores serve higher-risk zones.

Poor joint sealing allows moisture to enter and reduces thermal consistency.Continuous gaskets or sealant close the tongue-and-groove interface along its full length.

典型的な用途

General electronics assembly roomsDry packaging and inspection areasControlled warehouses and support corridorsTemporary cleanroom partitionsNon-wash-down laboratory support spaces

技術的なパラメータ

The following values represent common EPS cleanroom panel manufacturing ranges.

コア材料	Flame-retardant expanded polystyrene foam
パネルの厚さ	50, 80, 100, 120, 150 or 200 mm
有効幅	950, 1050 or 1130 mm
最大長さ	10000 mm
鋼鉄の厚さを直面する	0.40 — 0.60 mm
コア密度	12.5–20 kg/m³
熱伝導率	0.038–0.045 W/(m·K)
表面仕上げ	Polyester- or food-safe coated galvanized steel
ジョイントタイプ	Visible or concealed interlocking joint with sealant
カスタマイズ	目的のアプリケーションおよび動作環境に基づいて利用可能

利用可能なオプション

Food-safe surfaceLocal fixture reinforcementAlternative modular widthCustom dry-area wall and ceiling modules

Planning a EPS Insulated Cleanroom Panel specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する