Complete EPS insulated cleanroom panel with coated steel faces

클린룸 벽 및 천장 시스템

EPS 절연 클린룸 패널

A lightweight and economical sandwich panel with an expanded-polystyrene core between coated steel facings, intended for dry general-purpose cleanroom walls and ceilings where moderate insulation and fast installation are required.

Lightweight EPS Core
Economical Insulation
Smooth Steel Surfaces
Fast Modular Installation

견적 요청 제품 찾아보기

상품 소개

EPS Insulated Cleanroom Panels use molded expanded-polystyrene blocks bonded between profiled galvanized steel skins. The low-density core keeps panels light and delivers useful thermal separation for general indoor controlled areas. Smooth outer facings create the cleanable surface, while shaped joints align modules and reduce open gaps. EPS is best used where severe heat exposure, aggressive wash-down and high structural loading are not governing requirements. With protected edges and suitable reinforcement around openings, it provides a cost-efficient enclosure for many dry manufacturing and support spaces.

주요 기능

Expanded polystyrene provides practical insulation at a low material and handling weight.

Large modules can be positioned quickly with modest lifting equipment.

Bonded steel skins add surface rigidity and protect the cellular foam core.

Factory-formed joints create predictable alignment across long interior wall runs.

The straightforward panel structure supports economical replacement and room reconfiguration.

고객 제품 관심사

Correct use depends on protecting the foam, controlling heat exposure, reinforcing fixtures and keeping water out of panel edges.

EPS can be damaged when an exposed edge is struck or abraded.Metal closure profiles protect every perimeter and service opening from direct impact.

A lightweight core does not safely carry heavy wall-mounted equipment by itself.Solid inserts or independent supports transfer concentrated loads away from the foam.

High-temperature areas can exceed the suitable service range of EPS.EPS panels are assigned to ordinary dry interiors while mineral or PIR cores serve higher-risk zones.

Poor joint sealing allows moisture to enter and reduces thermal consistency.Continuous gaskets or sealant close the tongue-and-groove interface along its full length.

일반적인 응용 프로그램

General electronics assembly roomsDry packaging and inspection areasControlled warehouses and support corridorsTemporary cleanroom partitionsNon-wash-down laboratory support spaces

기술 매개변수

The following values represent common EPS cleanroom panel manufacturing ranges.

핵심 재료	Flame-retardant expanded polystyrene foam
패널 두께	50, 80, 100, 120, 150 or 200 mm
유효 폭	950, 1050 or 1130 mm
최대 길이	10000 mm
강철 면면 두께	0. 40 - 0. 60 mm
코어 밀도	12.5–20 kg/m³
열전도도 (Thermal Conductivity)	0.038–0.045 W/(m·K)
표면 마무리	Polyester- or food-safe coated galvanized steel
접합 유형	Visible or concealed interlocking joint with sealant
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

Food-safe surfaceLocal fixture reinforcementAlternative modular widthCustom dry-area wall and ceiling modules

Planning a EPS Insulated Cleanroom Panel specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.