Six-element finned-tubular electric air heater bank

Cleanroom HVAC dan Peralatan Penanganan Udara

Pemanas Udara Listrik Finned-Tubular

A framed six-element resistance heater bank that adds controlled sensible heat to cleanroom supply air using robust finned tubular elements.

Six Protected Heating Elements
High Surface-Area Fins
Fast Sensible Heating
Replaceable Individual Elements

Permintaan untuk kutipan Browse Produk

Perkenalan produk

Six metal-sheathed resistance elements are fitted with continuous fins and supported in a rigid stainless frame. The enlarged surface area spreads electric heat into the passing air at a lower sheath loading than an exposed wire coil. Ceramic terminal insulators and a side junction box isolate power connections from the airstream, while the modular layout allows one element to be replaced without discarding the full bank.

Fitur utama:

Metal-sheathed elements protect the resistance conductor from direct contact with the air stream.

Continuous fins increase convection area and distribute heat across the full face of the bank.

Six independently terminated elements permit staged power control and balanced three-phase loading.

A removable junction cover gives direct access to ceramic terminals and individual element connections.

Kekhawatiran produk pelanggan

Electric air heating must provide uniform temperature rise without overheated wire sections or inaccessible terminals.

Exposed resistance wire is vulnerable to contamination and physical damage.A stainless metal sheath encloses each resistance conductor before heat reaches the fins.

Uneven airflow creates local element overheating.Six evenly spaced finned elements spread watt density across the full heater face.

One failed element forces replacement of the complete heater.Each finned element is individually terminated and removable from the support frame.

Electrical terminals are difficult to inspect inside an AHU section.The external side junction box groups insulated connections outside the active airflow path.

Aplikasi yang Tipis

Cleanroom AHU preheat sectionsLow-temperature supply-air heatingLaboratory make-up air unitsDrying and tempering modulesStandby heat for hydronic coil systems

Parameter teknis

Typical physical construction for a six-element finned-tubular heater bank is summarized below.

Bahan inti	Incoloy or stainless tubular elements with nickel-chromium resistance wire and magnesium-oxide insulation
Ketebalan Panel (Panel Thickness)	1.5-2.5 mm stainless support-frame thickness
Efektif lebar	400-1600 mm active heater face width
Panjang maksimum	Up to 2200 mm element bank length
Baja menghadap ketebalan	1.2-2.0 mm stainless junction-box sheet
Kepadatan inti (core density)	Approximately 2200-3000 kg/m³ for compacted magnesium-oxide element insulation
Konduktivitas Termal (Thermal Conductivity)	Approximately 20-30 W/(m·K) for compacted magnesium-oxide insulation
Permukaan selesai	Natural stainless or passivated Incoloy sheath with metallic fins
Jenis Bersama	Bolted six-element frame with threaded terminal studs and ceramic insulators
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Stainless steel or Incoloy element sheathSingle-stage, multi-stage or SCR power controlHigh-limit cutout and airflow interlockCustom frame dimensions and terminal-box orientation

Planning a Finned-Tubular Electric Air Heater specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami