Three-quarter view of a hinged explosion relief damper with honeycomb panel

Sistem Distribusi Udara Cleanroom

Ledakan Relief Damper

A lightweight hinged relief panel held by calibrated releases so a rapid internal pressure rise can open a defined vent area and discharge safely.

Lightweight Honeycomb Relief Panel
Calibrated Release Mechanism
Hinged Controlled Opening
Tethered or Deflected Travel

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The explosion relief damper mounts a rigid aluminum-faced honeycomb panel in a structural angle frame. Magnetic, trigger or fracture releases hold the panel against a perimeter seal during normal operation. A rapid internal pressure rise overcomes the selected release load and swings or lifts the panel clear of the opening. Hinges, spring beds, tethers or deflector plates control panel travel and reaction force, while reclosable release arrangements allow the opening to be reset after inspection when the components remain serviceable.

Fitur utama:

Low-mass honeycomb construction reduces panel inertia so the relief area opens rapidly under pressure impulse.

Calibrated magnetic, mechanical trigger or fracture releases establish the opening force independently of panel weight.

Hinges, tethers and optional deflectors constrain movement and direct the discharged pressure away from adjacent access routes.

A continuous perimeter seal limits weather and process-air leakage during normal enclosure operation.

Kekhawatiran produk pelanggan

Explosion relief requires a sufficiently large free opening, predictable release force and a discharge path that does not expose personnel or nearby equipment to the moving panel or vented products.

A heavy closure opens too slowly and allows damaging pressure to build inside the protected enclosure.An aluminum honeycomb panel provides a rigid weather surface with substantially lower moving mass.

Normal process pressure or vibration causes nuisance opening.The number and load of the release elements establish a repeatable hold-down force above ordinary operating pressure.

An unrestrained relief panel becomes a projectile after opening.Hinges, cable tethers and energy-absorbing supports keep the panel attached and control its travel.

The vent discharge is directed toward a walkway or sensitive equipment.Panel orientation and steel deflector geometry route the relieved flow toward a designated safe discharge zone.

Aplikasi yang Tipis

Dust collector explosion ventingDryer and process filter protectionBattery material handling enclosuresPowder conveying equipmentIndustrial room or equipment pressure relief

Parameter teknis

Representative construction ranges for a hinged reusable explosion relief damper are shown below.

Bahan inti	Lightweight aluminum honeycomb core between aluminum face sheets with perimeter sponge seal
Ketebalan Panel (Panel Thickness)	25–75 mm rigid honeycomb relief panel
Efektif lebar	300–2000 mm nominal clear relief opening width
Panjang maksimum	Up to 3000 mm maximum panel dimension
Baja menghadap ketebalan	2.0–5.0 mm structural angle frame, release arms and deflector plates
Kepadatan inti (core density)	Approximately 40–80 kg/m³ effective aluminum honeycomb core density
Konduktivitas Termal (Thermal Conductivity)	Approximately 0.8–2.0 W/(m·K) effective through-panel conductivity
Permukaan selesai	Natural or coated aluminum panel with painted carbon-steel or stainless release hardware
Jenis Bersama	Top-hinged angle frame with perimeter seal, calibrated magnetic or trigger releases and restrained panel travel
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Side-wall, rooftop or round opening configurationMagnetic, mechanical trigger or replaceable fracture releaseCable tether or steel deflector travel controlWeather hood and corrosion-resistant hardware

Planning a Explosion Relief Damper specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami