Three-quarter view of a hinged explosion relief damper with honeycomb panel

클린룸 공기 분배 시스템

폭발 완화 댐퍼 (Explosion relief damper)

A lightweight hinged relief panel held by calibrated releases so a rapid internal pressure rise can open a defined vent area and discharge safely.

Lightweight Honeycomb Relief Panel
Calibrated Release Mechanism
Hinged Controlled Opening
Tethered or Deflected Travel

견적 요청 제품 찾아보기

상품 소개

The explosion relief damper mounts a rigid aluminum-faced honeycomb panel in a structural angle frame. Magnetic, trigger or fracture releases hold the panel against a perimeter seal during normal operation. A rapid internal pressure rise overcomes the selected release load and swings or lifts the panel clear of the opening. Hinges, spring beds, tethers or deflector plates control panel travel and reaction force, while reclosable release arrangements allow the opening to be reset after inspection when the components remain serviceable.

주요 기능

Low-mass honeycomb construction reduces panel inertia so the relief area opens rapidly under pressure impulse.

Calibrated magnetic, mechanical trigger or fracture releases establish the opening force independently of panel weight.

Hinges, tethers and optional deflectors constrain movement and direct the discharged pressure away from adjacent access routes.

A continuous perimeter seal limits weather and process-air leakage during normal enclosure operation.

고객 제품 관심사

Explosion relief requires a sufficiently large free opening, predictable release force and a discharge path that does not expose personnel or nearby equipment to the moving panel or vented products.

A heavy closure opens too slowly and allows damaging pressure to build inside the protected enclosure.An aluminum honeycomb panel provides a rigid weather surface with substantially lower moving mass.

Normal process pressure or vibration causes nuisance opening.The number and load of the release elements establish a repeatable hold-down force above ordinary operating pressure.

An unrestrained relief panel becomes a projectile after opening.Hinges, cable tethers and energy-absorbing supports keep the panel attached and control its travel.

The vent discharge is directed toward a walkway or sensitive equipment.Panel orientation and steel deflector geometry route the relieved flow toward a designated safe discharge zone.

일반적인 응용 프로그램

Dust collector explosion ventingDryer and process filter protectionBattery material handling enclosuresPowder conveying equipmentIndustrial room or equipment pressure relief

기술 매개변수

Representative construction ranges for a hinged reusable explosion relief damper are shown below.

핵심 재료	Lightweight aluminum honeycomb core between aluminum face sheets with perimeter sponge seal
패널 두께	25–75 mm rigid honeycomb relief panel
유효 폭	300–2000 mm nominal clear relief opening width
최대 길이	Up to 3000 mm maximum panel dimension
강철 면면 두께	2.0–5.0 mm structural angle frame, release arms and deflector plates
코어 밀도	Approximately 40–80 kg/m³ effective aluminum honeycomb core density
열전도도 (Thermal Conductivity)	Approximately 0.8–2.0 W/(m·K) effective through-panel conductivity
표면 마무리	Natural or coated aluminum panel with painted carbon-steel or stainless release hardware
접합 유형	Top-hinged angle frame with perimeter seal, calibrated magnetic or trigger releases and restrained panel travel
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Side-wall, rooftop or round opening configurationMagnetic, mechanical trigger or replaceable fracture releaseCable tether or steel deflector travel controlWeather hood and corrosion-resistant hardware

Planning a Explosion Relief Damper specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.