Three-quarter view of a hinged explosion relief damper with honeycomb panel

Hệ thống phân phối không khí phòng sạch

Thiết bị giảm xóc nổ

A lightweight hinged relief panel held by calibrated releases so a rapid internal pressure rise can open a defined vent area and discharge safely.

Lightweight Honeycomb Relief Panel
Calibrated Release Mechanism
Hinged Controlled Opening
Tethered or Deflected Travel

Yêu cầu báo giá Duyệt các sản phẩm

Giới thiệu Sản phẩm

The explosion relief damper mounts a rigid aluminum-faced honeycomb panel in a structural angle frame. Magnetic, trigger or fracture releases hold the panel against a perimeter seal during normal operation. A rapid internal pressure rise overcomes the selected release load and swings or lifts the panel clear of the opening. Hinges, spring beds, tethers or deflector plates control panel travel and reaction force, while reclosable release arrangements allow the opening to be reset after inspection when the components remain serviceable.

Các tính năng chính

Low-mass honeycomb construction reduces panel inertia so the relief area opens rapidly under pressure impulse.

Calibrated magnetic, mechanical trigger or fracture releases establish the opening force independently of panel weight.

Hinges, tethers and optional deflectors constrain movement and direct the discharged pressure away from adjacent access routes.

A continuous perimeter seal limits weather and process-air leakage during normal enclosure operation.

Các mối quan tâm về sản phẩm của khách hàng

Explosion relief requires a sufficiently large free opening, predictable release force and a discharge path that does not expose personnel or nearby equipment to the moving panel or vented products.

A heavy closure opens too slowly and allows damaging pressure to build inside the protected enclosure.An aluminum honeycomb panel provides a rigid weather surface with substantially lower moving mass.

Normal process pressure or vibration causes nuisance opening.The number and load of the release elements establish a repeatable hold-down force above ordinary operating pressure.

An unrestrained relief panel becomes a projectile after opening.Hinges, cable tethers and energy-absorbing supports keep the panel attached and control its travel.

The vent discharge is directed toward a walkway or sensitive equipment.Panel orientation and steel deflector geometry route the relieved flow toward a designated safe discharge zone.

Các ứng dụng điển hình

Dust collector explosion ventingDryer and process filter protectionBattery material handling enclosuresPowder conveying equipmentIndustrial room or equipment pressure relief

Thông số kỹ thuật

Representative construction ranges for a hinged reusable explosion relief damper are shown below.

Vật liệu lõi	Lightweight aluminum honeycomb core between aluminum face sheets with perimeter sponge seal
Độ dày bảng điều khiển	25–75 mm rigid honeycomb relief panel
Chiều rộng hiệu quả	300–2000 mm nominal clear relief opening width
Chiều dài tối đa	Up to 3000 mm maximum panel dimension
Thép đối mặt với độ dày	2.0–5.0 mm structural angle frame, release arms and deflector plates
Mật độ lõi	Approximately 40–80 kg/m³ effective aluminum honeycomb core density
Độ dẫn nhiệt	Approximately 0.8–2.0 W/(m·K) effective through-panel conductivity
Kết thúc bề mặt	Natural or coated aluminum panel with painted carbon-steel or stainless release hardware
Loại khớp nối	Top-hinged angle frame with perimeter seal, calibrated magnetic or trigger releases and restrained panel travel
Tùy chỉnh	Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động.

Các tùy chọn có sẵn

Side-wall, rooftop or round opening configurationMagnetic, mechanical trigger or replaceable fracture releaseCable tether or steel deflector travel controlWeather hood and corrosion-resistant hardware

Planning a Explosion Relief Damper specification?

Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.

Nói chuyện với đội ngũ của chúng tôi