Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Aksesoris Instalasi Cleanroom
Gasket EPDM Gasket EPDM Gasket
A resilient black EPDM compression gasket formed as a closed loop or cut profile for sealing cleanroom frames, panels and service covers.
- Weather-Resistant EPDM
- Controlled Compression Recovery
- Closed-Loop Frame Seal
- Profile-Specific Fit
Perkenalan produk
The EPDM gasket is extruded from black ethylene propylene diene rubber as a hollow or cellular profile with raised sealing ribs. Cut lengths can be joined into rectangular loops for doors, access covers and equipment frames, while continuous profiles suit straight panel interfaces. The compound retains elastic recovery under repeated compression and offers practical resistance to water, ozone, weathering and many dilute cleaning solutions encountered around controlled environments.
Fitur utama:
A hollow compressible section accommodates hardware tolerances without excessive closing force.
EPDM resists ozone, moisture and outdoor weathering better than many general-purpose rubbers.
Vulcanized or bonded corner joints create a continuous loop around rectangular openings.
Kekhawatiran produk pelanggan
A frame gasket must close variable gaps repeatedly while avoiding excessive latch force or permanent compression set.
A solid oversized gasket makes doors difficult to close and overloads latches.The hollow profile compresses progressively so sealing pressure develops without an abrupt closing load.
Flattened rubber fails to recover after long periods under compression.An EPDM compound and section geometry are selected for resilient recovery at the intended squeeze.
Open corner joints become leakage paths around access frames.Factory-vulcanized or carefully bonded mitred corners maintain a continuous closed loop.
Ozone and cleaning moisture crack unsuitable elastomers.Weather-resistant EPDM provides durable service where oil exposure is not the primary requirement.
Aplikasi yang Tipis
Cleanroom door and hatch framesAccess-panel perimeter sealsAir-handling equipment coversPanel-to-frame compression jointsUtility enclosure doors
Parameter teknis
Typical construction ranges for a custom extruded EPDM compression gasket are shown below.
| Bahan inti | Black EPDM elastomer in hollow, cellular or compact extruded profile |
|---|---|
| Ketebalan Panel (Panel Thickness) | 3-20 mm uncompressed gasket profile height |
| Efektif lebar | 6-40 mm profile contact width |
| Panjang maksimum | Up to 50000 mm continuous extrusion or custom closed-loop perimeter |
| Baja menghadap ketebalan | 0.50-2.00 mm compatible frame flange or retaining channel thickness |
| Kepadatan inti (core density) | Approximately 450-750 kg/m³ for cellular EPDM or 1100-1250 kg/m³ for compact EPDM |
| Konduktivitas Termal (Thermal Conductivity) | Approximately 0.06-0.25 W/(m·K), depending on cellular or compact construction |
| Permukaan selesai | Smooth or fine-textured matte black extruded rubber with defined sealing ribs |
| Jenis Bersama | Continuous cut length, bonded splice or vulcanized rectangular closed loop |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Hollow or cellular profileSelf-adhesive mounting stripVulcanized closed loopCustom cross-section and corner radius
Planning a EPDM Gasket specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
