Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Sistem Distribusi Udara Cleanroom
Isolator Getaran Saluran Saluran Isolator Getaran Saluran
A spring-and-neoprene hanger that interrupts the rigid load path between suspended ductwork or inline fans and the building structure.
- Low-Frequency Steel Coil Spring
- Neoprene High-Frequency Isolation
- Zinc-Plated Hanger Housing
- Threaded-Rod Misalignment Protection
Perkenalan produk
The duct vibration isolator is installed in the threaded-rod suspension path supporting ductwork, inline fans or a trapeze frame. A laterally stable steel coil spring carries the vertical load, while a molded neoprene element and lower spring cup attenuate higher-frequency vibration and prevent the rod from contacting the steel housing. The open hanger frame permits visual confirmation of spring compression after loading. Oversized rod openings accommodate limited angular misalignment so the isolator can deflect freely without creating a metal-to-metal short circuit.
Fitur utama:
A molded neoprene element in series with the spring reduces high-frequency fan and blade-passage transmission.
The open zinc-plated housing allows installers to inspect spring alignment and verify that the coil remains free of the frame.
Oversized rod passages and resilient collars tolerate practical suspension-rod offset without metal contact.
Kekhawatiran produk pelanggan
Effective isolation depends on matching each hanger to its actual supported load, preserving free spring movement and preventing the threaded rod from touching the steel housing.
A spring selected for too much load becomes coil-bound and transmits vibration directly into the ceiling.The supported weight is divided by the actual hanger count so every spring operates within its rated load and deflection range.
An oversized spring barely compresses and provides little low-frequency isolation.A load-matched color-coded coil reaches the intended static deflection under normal operating weight.
A misaligned threaded rod rubs the hanger frame and bypasses the resilient elements.An oversized opening and neoprene collar keep the rod separated from the steel bracket through limited angular offset.
Unequal hanger loading twists the duct trapeze and overloads one corner.Level support geometry and individually selected spring capacities distribute the suspended weight across all isolation points.
Aplikasi yang Tipis
Suspended cleanroom supply and exhaust ductsInline duct fan supportsFan-coil and terminal-unit hangersLaboratory exhaust duct trapezesMechanical-room piping and duct suspension
Parameter teknis
Representative construction ranges for a spring-and-neoprene duct vibration isolation hanger are listed below.
| Bahan inti | Laterally stable steel coil spring in series with molded neoprene cap and collar |
|---|---|
| Ketebalan Panel (Panel Thickness) | 1.5–2.5 mm stamped and welded steel hanger housing |
| Efektif lebar | 50–100 mm clear housing width for suspended threaded-rod alignment |
| Panjang maksimum | 150–300 mm overall hanger height depending on spring deflection and load range |
| Baja menghadap ketebalan | 1.5–2.5 mm zinc-plated steel bracket and load plate |
| Kepadatan inti (core density) | Approximately 7850 kg/m³ for the load-bearing spring steel |
| Konduktivitas Termal (Thermal Conductivity) | Approximately 45–50 W/(m·K) through the hardened steel coil spring |
| Permukaan selesai | Zinc-plated or powder-coated steel housing with color-coded spring and black neoprene elements |
| Jenis Bersama | Threaded-rod suspension through an open steel bracket, steel coil spring and neoprene load-distribution cup |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
13 mm or 25 mm nominal spring deflectionLight-duty and heavy-duty load rangesSpring with neoprene or fiberglass high-frequency elementPreloaded or seismic-restraint hanger housing
Planning a Duct Vibration Isolator specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
