Pembekal Satu Henti Anda untuk Peralatan Bilik Bersih dan Kemudahan AseptikSokongan Projek Antarabangsa
Open mobile navigationClose mobile navigation
Sistem Pengedaran Udara Bilik Bersih

Pengisolasi getaran saluran

A spring-and-neoprene hanger that interrupts the rigid load path between suspended ductwork or inline fans and the building structure.
  • Low-Frequency Steel Coil Spring
  • Neoprene High-Frequency Isolation
  • Zinc-Plated Hanger Housing
  • Threaded-Rod Misalignment Protection
Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The duct vibration isolator is installed in the threaded-rod suspension path supporting ductwork, inline fans or a trapeze frame. A laterally stable steel coil spring carries the vertical load, while a molded neoprene element and lower spring cup attenuate higher-frequency vibration and prevent the rod from contacting the steel housing. The open hanger frame permits visual confirmation of spring compression after loading. Oversized rod openings accommodate limited angular misalignment so the isolator can deflect freely without creating a metal-to-metal short circuit.

Ciri-ciri Utama

A color-coded steel coil spring provides measurable static deflection for low-frequency vibration isolation.

A molded neoprene element in series with the spring reduces high-frequency fan and blade-passage transmission.

The open zinc-plated housing allows installers to inspect spring alignment and verify that the coil remains free of the frame.

Oversized rod passages and resilient collars tolerate practical suspension-rod offset without metal contact.

Kebimbangan Produk Pelanggan

Effective isolation depends on matching each hanger to its actual supported load, preserving free spring movement and preventing the threaded rod from touching the steel housing.

A spring selected for too much load becomes coil-bound and transmits vibration directly into the ceiling.The supported weight is divided by the actual hanger count so every spring operates within its rated load and deflection range.
An oversized spring barely compresses and provides little low-frequency isolation.A load-matched color-coded coil reaches the intended static deflection under normal operating weight.
A misaligned threaded rod rubs the hanger frame and bypasses the resilient elements.An oversized opening and neoprene collar keep the rod separated from the steel bracket through limited angular offset.
Unequal hanger loading twists the duct trapeze and overloads one corner.Level support geometry and individually selected spring capacities distribute the suspended weight across all isolation points.

Permohonan yang biasa

Suspended cleanroom supply and exhaust ductsInline duct fan supportsFan-coil and terminal-unit hangersLaboratory exhaust duct trapezesMechanical-room piping and duct suspension

Parameter teknikal

Representative construction ranges for a spring-and-neoprene duct vibration isolation hanger are listed below.

Bahan TerasLaterally stable steel coil spring in series with molded neoprene cap and collar
Ketebalan Panel1.5–2.5 mm stamped and welded steel hanger housing
Lebar berkesan50–100 mm clear housing width for suspended threaded-rod alignment
Panjang maksimum150–300 mm overall hanger height depending on spring deflection and load range
Keluli Menghadapi Ketebalan1.5–2.5 mm zinc-plated steel bracket and load plate
Ketumpatan terasApproximately 7850 kg/m³ for the load-bearing spring steel
Kekonduksian TermaApproximately 45–50 W/(m·K) through the hardened steel coil spring
Kemasan permukaanZinc-plated or powder-coated steel housing with color-coded spring and black neoprene elements
Jenis BersatuThreaded-rod suspension through an open steel bracket, steel coil spring and neoprene load-distribution cup
PenyesuaianBoleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

13 mm or 25 mm nominal spring deflectionLight-duty and heavy-duty load rangesSpring with neoprene or fiberglass high-frequency elementPreloaded or seismic-restraint hanger housing

Planning a Duct Vibration Isolator specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami
Email Kami WhatsApp WeChat

Laman Utama

Produk

Berita

Tentang Kami

Hubungi Kami