UV-C lamp safety timer controller with keyed switch and digital display

Éclairage de salle blanche et équipements électriques

Contrôleur UV Lamp Timer

A dedicated wall controller that sequences delayed start, timed UV-C operation, warnings and safety interlock inputs from one sealed panel.

Keyed Enable Control
Adjustable Cycle Timer
Delayed Start Warning
Door and Sensor Inputs

Demander un devis. Browse les produits

Introduction de produit

The UV-C controller separates germicidal operation from ordinary room-light switching. Its cleanable front panel carries a key switch, timer display, start/stop controls and status indicators. Inside the enclosure, a contactor or relay output switches the UV-C load while low-voltage terminals accept door contacts, occupancy sensors, warning beacons and remote emergency-stop devices.

Key Features

A keyed enable switch limits cycle initiation to authorized personnel.

The programmable delay provides a defined exit interval before lamp energization.

A digital display shows remaining treatment time and operating state.

Dedicated safety inputs interrupt the output when a monitored door opens or occupancy is detected.

Separate relay terminals operate external beacons and audible warnings.

Préoccupations du client produit

A basic timer alone cannot manage warning, authorization and interruption functions required around an unattended UV-C cycle.

Anyone can start a germicidal circuit from a normal wall switch.A key-controlled enable stage restricts initiation to designated operators.

Personnel have no time to leave after pressing start.An adjustable countdown drives warnings before the power relay closes.

Opening a door does not stop an independent timer output.Hardwired safety inputs drop the UV-C contactor immediately on an interlock event.

The operator cannot see whether a cycle ended or was interrupted.Distinct display states report standby, delay, active, complete and fault conditions.

Les applications typiques

Fixed UV-C room systemsPass-box germicidal circuitsDuct irradiation controlsLaboratory treatment rooms

Paramètres techniques

Typical configurable construction ranges for a UV-C lamp safety timer controller are listed below.

Matériaux de base	Powder-coated steel or stainless enclosure with programmable timer, contactor, control relays and membrane interface
Panneau épaisseur	90-180 mm wall enclosure depth
Largeur effective	180-400 mm front-panel width
Longueur maximale	Up to 500 mm overall enclosure height
Acier face épaisseur	1.0-1.5 mm formed steel or stainless enclosure panels
Densité Core	Approximately 7900-8000 kg/m³ for a stainless enclosure version
Conductivité thermique	14 - 16 W / (m · K) pour le boîtier inoxydable par
surface finie	White powder coat or fine-brushed stainless front with black display and colored status indicators
Type joint	Gasketed enclosure door with sealed membrane controls and separated power and low-voltage terminal blocks
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Options disponibles

Wall flush or surface enclosureLocal or networked timerDoor, motion and emergency-stop inputsExternal beacon and buzzer outputs

Planning a UV Lamp Timer Controller specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe