UV-C lamp safety timer controller with keyed switch and digital display

Reinraum Beleuchtung und elektrische Ausrüstung

UV-Lampe Timer Controller

A dedicated wall controller that sequences delayed start, timed UV-C operation, warnings and safety interlock inputs from one sealed panel.

Keyed Enable Control
Adjustable Cycle Timer
Delayed Start Warning
Door and Sensor Inputs

Bitte senden Sie eine Anfrage. Browse Produkte

Produkteinführung

The UV-C controller separates germicidal operation from ordinary room-light switching. Its cleanable front panel carries a key switch, timer display, start/stop controls and status indicators. Inside the enclosure, a contactor or relay output switches the UV-C load while low-voltage terminals accept door contacts, occupancy sensors, warning beacons and remote emergency-stop devices.

Key Features

A keyed enable switch limits cycle initiation to authorized personnel.

The programmable delay provides a defined exit interval before lamp energization.

A digital display shows remaining treatment time and operating state.

Dedicated safety inputs interrupt the output when a monitored door opens or occupancy is detected.

Separate relay terminals operate external beacons and audible warnings.

Kunden Produktbedenken

A basic timer alone cannot manage warning, authorization and interruption functions required around an unattended UV-C cycle.

Anyone can start a germicidal circuit from a normal wall switch.A key-controlled enable stage restricts initiation to designated operators.

Personnel have no time to leave after pressing start.An adjustable countdown drives warnings before the power relay closes.

Opening a door does not stop an independent timer output.Hardwired safety inputs drop the UV-C contactor immediately on an interlock event.

The operator cannot see whether a cycle ended or was interrupted.Distinct display states report standby, delay, active, complete and fault conditions.

Typische Anwendungen

Fixed UV-C room systemsPass-box germicidal circuitsDuct irradiation controlsLaboratory treatment rooms

Technische Parameter

Typical configurable construction ranges for a UV-C lamp safety timer controller are listed below.

Core Material	Powder-coated steel or stainless enclosure with programmable timer, contactor, control relays and membrane interface
Panel Dicke	90-180 mm wall enclosure depth
Effektive Breite	180-400 mm front-panel width
Maximale Länge	Up to 500 mm overall enclosure height
Stahl facing Dicke	1.0-1.5 mm formed steel or stainless enclosure panels
Kerndichte	Approximately 7900-8000 kg/m³ for a stainless enclosure version
Thermische Leitfähigkeit	14 - 16 W / (m · K) für das rostfreie Gehäuse
Oberfläche Finish	White powder coat or fine-brushed stainless front with black display and colored status indicators
Gemeinsamer Typ	Gasketed enclosure door with sealed membrane controls and separated power and low-voltage terminal blocks
Customisierung	Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung.

Verfügbare Optionen

Wall flush or surface enclosureLocal or networked timerDoor, motion and emergency-stop inputsExternal beacon and buzzer outputs

Planning a UV Lamp Timer Controller specification?

Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.

Sprechen Sie mit unserem Team