UV-C lamp safety timer controller with keyed switch and digital display

클린룸 조명 및 전기 장비

UV 램프 타이머 컨트롤러

A dedicated wall controller that sequences delayed start, timed UV-C operation, warnings and safety interlock inputs from one sealed panel.

Keyed Enable Control
Adjustable Cycle Timer
Delayed Start Warning
Door and Sensor Inputs

견적 요청 제품 찾아보기

상품 소개

The UV-C controller separates germicidal operation from ordinary room-light switching. Its cleanable front panel carries a key switch, timer display, start/stop controls and status indicators. Inside the enclosure, a contactor or relay output switches the UV-C load while low-voltage terminals accept door contacts, occupancy sensors, warning beacons and remote emergency-stop devices.

주요 기능

A keyed enable switch limits cycle initiation to authorized personnel.

The programmable delay provides a defined exit interval before lamp energization.

A digital display shows remaining treatment time and operating state.

Dedicated safety inputs interrupt the output when a monitored door opens or occupancy is detected.

Separate relay terminals operate external beacons and audible warnings.

고객 제품 관심사

A basic timer alone cannot manage warning, authorization and interruption functions required around an unattended UV-C cycle.

Anyone can start a germicidal circuit from a normal wall switch.A key-controlled enable stage restricts initiation to designated operators.

Personnel have no time to leave after pressing start.An adjustable countdown drives warnings before the power relay closes.

Opening a door does not stop an independent timer output.Hardwired safety inputs drop the UV-C contactor immediately on an interlock event.

The operator cannot see whether a cycle ended or was interrupted.Distinct display states report standby, delay, active, complete and fault conditions.

일반적인 응용 프로그램

Fixed UV-C room systemsPass-box germicidal circuitsDuct irradiation controlsLaboratory treatment rooms

기술 매개변수

Typical configurable construction ranges for a UV-C lamp safety timer controller are listed below.

핵심 재료	Powder-coated steel or stainless enclosure with programmable timer, contactor, control relays and membrane interface
패널 두께	90-180 mm wall enclosure depth
유효 폭	180-400 mm front-panel width
최대 길이	Up to 500 mm overall enclosure height
강철 면면 두께	1.0-1.5 mm formed steel or stainless enclosure panels
코어 밀도	Approximately 7900-8000 kg/m³ for a stainless enclosure version
열전도도 (Thermal Conductivity)	스테인레스 케이스용 14 - 16 W / (m · K)
표면 마무리	White powder coat or fine-brushed stainless front with black display and colored status indicators
접합 유형	Gasketed enclosure door with sealed membrane controls and separated power and low-voltage terminal blocks
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Wall flush or surface enclosureLocal or networked timerDoor, motion and emergency-stop inputsExternal beacon and buzzer outputs

Planning a UV Lamp Timer Controller specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.