Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Salle blanche HVAC et équipement de manutention de l'air
High Pressure Brouillard Humidificateur
A high-capacity adiabatic system that pressurizes treated water and atomizes it through precision anti-drip nozzles into an AHU or large controlled space.
- Fine High-Pressure Atomization
- Low-Energy Adiabatic Operation
- Anti-Drip Nozzle Manifold
- Integrated Water Treatment
Introduction de produit
A stainless multistage pump raises treated water to high pressure and supplies a manifold of precision nozzles. Each orifice creates a fine mist that evaporates into the airstream, adding moisture while absorbing sensible heat. Filtration and reverse-osmosis pretreatment limit nozzle deposits, and staged nozzle banks or variable pump control match output to demand.
Key Features
Stainless pump, tubing and manifold resist continuous purified-water service.
Anti-drip nozzles close positively when pressure falls and reduce post-cycle wetting.
Integrated filtration and treatment protect small orifices from scale and suspended particles.
Préoccupations du client produit
High-pressure systems require fine atomization, clean water and controlled staging so droplets evaporate before reaching surfaces.
Nozzle deposits change spray pattern and create large droplets.Fine filtration and low-mineral treated water protect the precision orifices.
Nozzles drip after the pump stops.Spring-loaded anti-drip valves close each nozzle below operating pressure.
Short duct length does not allow full mist absorption.Nozzle placement, droplet size and staged capacity are matched to airflow and available distance.
A fixed-output pump causes repeated on-off cycling.Variable-speed pressure control or staged nozzle zones follow the actual humidity demand.
Les applications typiques
Large pharmaceutical cleanroomsElectronics manufacturing hallsData-center air handlersPrinting and paper productionIndustrial evaporative cooling and humidification
Paramètres techniques
Representative construction ranges for a packaged high-pressure mist station are listed below.
| Matériaux de base | AISI 304 or 316 stainless pump, manifold and tubing with ceramic or stainless nozzles |
|---|---|
| Panneau épaisseur | 1.2-2.0 mm powder-coated control-cabinet panels |
| Largeur effective | 600-1800 mm packaged pump-station width |
| Longueur maximale | Up to 5000 mm modular nozzle-manifold section length |
| Acier face épaisseur | 1.2-2.0 mm cabinet and stainless base sheet |
| Densité Core | Approximately 7900-8000 kg/m³ for stainless pump, manifold and tubing material |
| Conductivité thermique | Approximately 14-16 W/(m·K) for stainless water-contact parts |
| surface finie | White-blue powder coating with passivated stainless pump and tubing |
| Type joint | Compression-connected high-pressure tubing with threaded anti-drip nozzles and bolted skid |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
In-duct or direct-room nozzle arrangementIntegrated reverse-osmosis and ultraviolet treatmentVariable-speed pump or staged solenoid zonesStainless droplet separator and water-quality monitoring
Planning a High-Pressure Mist Humidifier specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
