Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Portes de salle blanche, fenêtres et systèmes de verrouillage
Panel de vision de salle blanche monté en flush
A fixed cleanroom window designed so the exposed glazing and perimeter trim align with the wall finish on both sides, eliminating projecting ledges.
- Double-Flush Faces
- Concealed Subframe
- No Exposed Fixings
- Easy-Clean Perimeter
Introduction de produit
The flush-mounted vision panel integrates two outer panes into a concealed subframe sized to the cleanroom wall thickness. Screen-printed or opaque glass borders hide the retained edge, while bonded glazing and overlapping perimeter flanges leave both room faces smooth. The sealed cavity can accept desiccant spacers or optional blinds, but the primary purpose is to remove horizontal ledges and visible fasteners from high-cleanliness partitions.
Key Features
The structural subframe and fixings remain behind the opaque glass border and reveal liner.
A sealed cavity separates the two room surfaces and supports stable differential-pressure performance.
Custom frame depth allows the same flush detail to fit common modular wall thicknesses.
Préoccupations du client produit
Flush glazing must preserve a flat wall face while keeping the concealed perimeter rigid, sealed and accessible during manufacture.
A projecting window sill interrupts wipe-down and creates a contamination ledge.The glass and trim finish in the same plane as the wall on both sides.
Visible screws and snap beads collect residue around the observation opening.The subframe and retained edge are concealed behind bonded opaque borders and overlapping flanges.
Wall thickness varies between cleanroom systems and leaves mismatched reveals.The frame depth and reveal liners are manufactured to the selected partition build-up.
Les applications typiques
Pharmaceutical process suitesBiotechnology cleanroomsHospital sterile corridorsSemiconductor support rooms
Paramètres techniques
Common dimensions and materials for a double-flush cleanroom vision-panel assembly are shown below.
| Matériaux de base | Two tempered safety-glass panes with sealed air cavity and concealed metal subframe |
|---|---|
| Panneau épaisseur | 50–150 mm overall assembly depth; typically 6 mm outer glass panes |
| Largeur effective | 400–1800 mm clear viewing width |
| Longueur maximale | 3000 mm overall window height |
| Acier face épaisseur | 1.0–1.5 mm stainless-steel architrave or reveal liner |
| Densité Core | Approximately 2500 kg/m³ for each glass pane; sealed cavity has no solid core |
| Conductivité thermique | Approximately 1.0 W/(m·K) for glass; cavity performance depends on glazing makeup |
| surface finie | Flush clear glass with ceramic-frit border; brushed stainless steel or powder-coated trim |
| Type joint | Concealed subframe with bonded glazing, sealed spacer and overlapping flush perimeter flanges |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation |
Options disponibles
Double-flush or single-side-flush constructionIntegral blindsLow-iron or laminated panesCustom wall depths and mullions
Planning a Flush-Mounted Cleanroom Vision Panel specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
