Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraum HVAC und Luftbehandlung Ausrüstung
Luftgekühlte Chiller
An outdoor liquid chiller that rejects heat directly to ambient air and supplies chilled water to cleanroom coils without a cooling tower.
- No Cooling Tower Required
- Outdoor Heat Rejection
- Staged or Variable Capacity
- Optional Integrated Hydronics
Produkteinführung
The air-cooled chiller circulates refrigerant between one or more compressors, a liquid evaporator and outdoor finned condenser coils. Axial fans move ambient air through the condenser, eliminating the cooling tower, condenser-water pump and water-treatment loop associated with a water-cooled plant. Scroll compressors suit smaller and modular duties, while screw compressors serve larger capacities. Multiple refrigerant circuits, fan staging and optional variable-speed control improve part-load response and allow the chiller to follow changing cleanroom demand.
Key Features
Independent refrigerant circuits provide staged capacity and reduce the impact of a single circuit shutdown.
Variable condenser fans control head pressure and reduce fan power during mild weather.
Factory hydronic options can combine pumps, expansion vessel and buffer volume on one outdoor base.
Kunden Produktbedenken
Air-cooled chillers are simple to site, but their capacity, noise and condensing pressure change with outdoor temperature and airflow conditions.
Hot recirculated discharge air reduces chiller capacity on a crowded roof.Adequate coil clearance and discharge orientation prevent short-circuiting of condenser air.
A large fixed compressor cycles repeatedly during low cleanroom load.Multiple circuits or variable-speed compression provide smaller capacity steps.
Low chilled-water volume causes rapid temperature swings and compressor cycling.A correctly sized buffer tank or minimum system volume stabilizes the hydronic loop.
Condenser noise reaches nearby occupied areas.Low-speed fan selection, compressor attenuation and night sound modes address acoustic limits.
Typische Anwendungen
Cleanroom chilled-water plantsPharmaceutical process coolingLaboratory HVAC systemsMedizinische GeräteproduktionIndustrial temperature-control loops
Technische Parameter
Representative construction and cold-surface insulation data for an outdoor air-cooled chiller are listed below.
| Core Material | Closed-cell NBR/PVC elastomeric foam on the evaporator and refrigerant suction piping |
|---|---|
| Panel Dicke | 1.0–2.0 mm removable equipment enclosure panels |
| Effektive Breite | 1000–2500 mm nominal unit width |
| Maximale Länge | Up to 12000 mm for multi-circuit V-bank condenser arrangement |
| Stahl facing Dicke | 1.0–2.0 mm galvanized structural and service panels |
| Kerndichte | 48–96 kg/m³ NBR/PVC elastomeric insulation |
| Thermische Leitfähigkeit | 0.0353 W/(m·K) at 24°C for the NBR/PVC elastomeric insulation |
| Oberfläche Finish | Outdoor polyester powder-coated galvanized steel with aluminum finned condenser coils |
| Gemeinsamer Typ | Welded structural base with bolted coil frames and removable gasketed service panels |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Scroll or screw compressor platformMicrochannel or aluminum-copper condenser coilIntegrated single or twin hydronic pumpsLow-ambient, low-noise and free-cooling packages
Planning a Air-Cooled Chiller specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
