İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Hizmet Sistemi
Gaz silindir kabine
A lockable, ventilated two-cylinder storage enclosure with inspection windows, independent restraint chains, a low threshold and fold-down loading ramp for orderly cylinder placement in laboratories and controlled utility areas.
- Ventilated steel enclosure sized for two upright cylinders
- Independent rails and chains restrain each cylinder
- Lockable double doors, inspection windows and fold-down ramp
Ürün tanıtımı
The Gas Cylinder Cabinet is a passive indoor enclosure for organizing and restraining two upright compressed-gas cylinders while keeping them visible and access-controlled. The selected catalogue configuration uses a tall safety-yellow welded steel body, two manual doors with clear inspection windows, one cylinder position behind each door, independent restraint rails and chains, a raised galvanized floor tray, a fold-down perforated loading ramp, fixed air-inlet louvers and a 100 mm top exhaust connection. The cabinet can be connected to a separately engineered exhaust system and can accept a gas-specific detector package when required. It contains no regulator, delivery manifold, automatic purge sequence or process-gas control panel.
Ana Özellikler
Two restraint levels per cylinder reduce the risk of movement at both the shoulder and lower body
Clear door windows allow a visual cylinder and restraint check before the cabinet is opened
A low reinforced threshold and fold-down perforated ramp simplify controlled trolley loading without a loose portable ramp
Fixed side louvers and a top exhaust collar provide a defined airflow path for connection to a suitable facility extraction system
A three-point lock handle limits unauthorized access and holds both doors securely during normal storage
Capped side penetrations can be selected for tubing routes without requiring uncontrolled field openings through the front doors
Powder-coated cold-rolled steel surfaces provide a cleanable, high-visibility enclosure suited to indoor utility and laboratory areas
Müşteri Ürün Sorunları
Cylinder storage safety depends on matching the enclosure, ventilation route, restraint layout and gas-segregation plan to the actual cylinders and room conditions.
Freestanding cylinders can be struck, displaced or left without reliable restraint in a busy utility areaAssign each cylinder a dedicated cabinet position with independent upper and lower restraints secured before the doors are closed.
A closed cupboard can allow leaked gas to accumulate if it has no defined inlet and exhaust pathUse the fixed louvers and top exhaust collar with a facility extraction design sized and discharged for the selected gas hazard.
Operators may need to open a cabinet simply to confirm whether cylinders are present and correctly restrainedProvide one clear inspection window for each cylinder position so occupancy and chain engagement can be checked externally.
Rolling a heavy cylinder over a tall sill can cause unstable handling or damage to the cabinet thresholdUse the integrated fold-down ramp and low reinforced threshold to create a controlled path from the cylinder trolley to the floor tray.
Incompatible gas families may be placed together when storage positions are not planned in advanceSpecify cabinet assignment, separation and labeling from the actual gas inventory; use separate enclosures where the site risk assessment requires segregation.
A generic detector may not respond correctly to the gas stored inside the enclosureSelect the sensor technology, sampling position, alarm thresholds and response logic for the named gas instead of assuming one detector suits every service.
Tipik uygulamalar
Analytical and quality-control laboratories using instrument gas cylindersPharmaceutical and biotechnology utility rooms with segregated cylinder positionsUniversity research laboratories storing inert or selected process gasesHospital laboratory and technical-service areasElectronics and clean manufacturing support roomsIndustrial pilot plants requiring orderly indoor cylinder restraint and controlled access
Teknik parametreler
The catalogue basis is one indoor two-cylinder storage cabinet in the SAFOO BA402, Method MC-GC902GLD and SAI-U GC0002Y size class. A representative external envelope is 900 mm wide by 450 mm deep by 1900 mm high. The welded cold-rolled steel body uses nominal 1.2 mm panels, double-layer door construction with nominal 1.0 mm steel facings, clear inspection glazing, 304 stainless restraint chains and a powder-coated safety-yellow finish. Exact cylinder diameter, door arrangement, exhaust collar, side penetrations, detector, alarm, electrical supply and color are selected for the intended gas inventory and room design.
| Temel malzemeler | Cold-rolled carbon-steel enclosure with 304 stainless restraint chains, galvanized floor tray and clear tempered-glass inspection windows |
|---|---|
| Panel kalınlığı | 1.2 mm nominal welded cabinet body panel thickness |
| Effective Width (Etkili Genişlik) | 900 mm nominal external width for the selected two-cylinder configuration |
| Maksimum uzunluk | 1900 mm nominal overall cabinet height before external exhaust ductwork |
| Çelik yüz yüze kalınlığı | 1.0 mm nominal cold-rolled steel facing for the double-layer manual doors |
| Core Density (Çekirdek Yoğunluğu) | Approximately 7850 kg/m³ representative density for the carbon-steel cabinet structure |
| Termal İletkenlik | Approximately 50 W/(m·K) near 20°C for representative carbon-steel enclosure components |
| Yüzey bitirme | Safety-yellow epoxy electrostatic powder coating with natural-silver stainless and galvanized loading components |
| Ortak tip | Welded cabinet seams, hinged double doors with three-point lock, bolted restraint rails and 100 mm top exhaust collar |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Single-, two- or three-cylinder cabinet widthSafety-yellow, light-gray or stainless-steel external finishGas-specific detector with local audible and visual alarmPowered exhaust fan or passive collar for facility extractionAlternative louver, exhaust-inlet and side penetration arrangementKeyed, padlockable or selected access-control hardwareAdditional cylinder rail height and stainless chain configurationGas-family labeling and site-specific external identification panels
Planning a Gas Cylinder Cabinet specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
