İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda HEPA Terminal Konutları
A fanless welded ceiling filter box that connects the supply duct to a sealed HEPA or ULPA panel and cleanroom diffuser with room-side service access.
Coordinate the FFU Network
FFU Controls & Ceiling Components
Bring your fan filter units, controls and ceiling interfaces together. Explore central controls, group controllers and supporting components to manage clean-air zones and fit your installation requirements.
7components and control systems
Compare 7 system components
01Provide the FFU quantity, room zoning and intended operating sequences.
02Confirm whether control is local, grouped, centralized or connected to the BMS.
03Define ceiling bay sizes, suspended loads and required terminal interfaces.
04List field protocols, power distribution boundaries and room-side service needs.
How to Select FFU Controls & Ceiling Components
Start with the operating task and site constraints, then compare the product direction that best matches the intended use.
| Buyer requirement | Product direction | Why it helps |
|---|---|---|
| Ducted final-filter terminal | Temiz Oda HEPA Terminal Konutları | Connects a supply duct to a sealed room-side serviceable filter. |
| Complete ducted air terminal | Entegre HEPA Temiz Hava Tedarik Modülü | Combines damper, equalization plenum, final filter and diffuser. |
| Coordinated ceiling support | FFU Ceiling Grid Sistemi | Supports FFUs, lights, blanks and service modules in sealed bays. |
| Whole-room multi-zone supervision | FFU Merkezi Kontrol Sistemi | Provides HMI-based zone commands, alarms and network integration. |
| One-zone coordinated operation | FFU Grup Kontrol Paneli | Controls a defined FFU group without a full central cabinet. |
| Single-unit adjustment or BMS integration | EC FFU Speed Controller or FFU BMS Communication Gateway | Provides local setpoint control or translates the FFU field bus for the building system. |
Compare 7 FFU Controls & Ceiling Components
Narrow your choices by the features that matter to your application. View specifications and add suitable models to your inquiry list for a tailored quote.
7 models shown
Entegre HEPA Temiz Hava Tedarik Modülü
A complete ducted ceiling terminal combining an inlet damper, pressure-equalizing plenum, sealed HEPA or ULPA filter and room-side diffuser in one cleanable module.
FFU Ceiling Grid Sistemi
A sealed modular T-grid structure that coordinates FFUs, lights, blank panels and service modules while transferring their loads to wall supports or suspension rods.
FFU Merkezi Kontrol Sistemi
A floor-standing control cabinet that supervises multiple FFU zones through an industrial HMI, protected power distribution and building-network communication.
FFU Grup Kontrol Paneli
A compact wall panel that gives one cleanroom zone coordinated start, stop, speed presets and fault indication without requiring a full central-control cabinet.
EC FFU Hız Kontrolörü
A local low-voltage controller that adjusts one EC fan filter unit through an isolated 0–10 V or PWM command and displays its operating setpoint.
FFU BMS İletişim Ağ Geçidi
A DIN-rail industrial gateway that translates an FFU field bus into selected BACnet or Modbus points for the building management system.
No models match every selected filter.
Reset one or more filters to compare a broader group.
Reset one or more filters to compare a broader group.
Solutions for Your Application
Overcome the Challenges in Your Process
Simplify the coordination of multiple FFUs with controls and ceiling components selected as a system. Match unit grouping, monitoring, building-management interfaces and service access to the way your cleanroom operates.
FFUs from one zone do not start or respond together.Use a group or central controller sized around the actual zoning plan.
The BMS cannot read useful FFU status points.Define the field protocol and point list before selecting a communication gateway.
Ceiling modules do not fit or seal consistently.Coordinate grid bay dimensions, gasket interfaces and suspended loads as one ceiling system.
Maintenance requires access above a congested ceiling.Select room-side serviceable terminal housings and document the access route.
A full central cabinet is unnecessary for a small zone.Use a local speed controller or group panel at the appropriate control scale.
Tell Us What Your Application Needs
- Number and type of FFUs
- Room and zone schedule
- Ceiling grid bay dimensions
- Power distribution boundary
- Local or centralized control scope
- Required BMS protocol and point list
- Alarm, trend and status requirements
- Service-access and installation constraints
Plan Your Cleanroom Equipment Together
Before choosing FFU Controls & Ceiling Components
It is useful when multiple zones require coordinated commands, alarm visibility, operating schedules or building-network integration.
A compatible local controller can command one EC FFU using the supported low-voltage interface, subject to the motor and controller specifications.
It also coordinates module dimensions, seals, blank panels, lights and service penetrations, so it should be planned with the ceiling layout.
Confirm the FFU field protocol, gateway protocol, network topology, point list, addressing and responsibility for commissioning.
Planning an FFU Control or Ceiling System?
Share your FFU schedule, ceiling layout and control requirements. Ask our team to help you select compatible components and quote your system.
