Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Control de salas limpias y sistemas de monitoreo ambiental
Sensor de ruido por
A fixed sound-level sensor that converts cleanroom acoustic pressure into a continuous weighted noise value for trend monitoring and alarms.
- Measurement Microphone
- Continuous dB Output
- Frequency and Time Weighting
- Remote Alarm Integration
Introducción del producto
The cleanroom noise level sensor combines a measurement microphone, preamplifier and digital signal processing in a wall or ceiling transmitter. Selected frequency and time weighting produce a consistent sound-level value for room trends, occupational studies or equipment-noise alarms. The microphone is protected by an acoustically transparent cap that can be inspected or replaced. Analog and digital outputs transfer the measured level without streaming room audio, preserving the function as a sound-pressure monitor rather than a recording device.
Características clave
Configurable frequency and time weighting supports different monitoring objectives.
Continuous dB output reveals gradual equipment-noise changes as well as threshold events.
The transmitter reports numeric sound level without capturing intelligible audio recordings.
Preocupaciones del producto del cliente
Fixed noise monitoring must distinguish meaningful changes from short impacts and must not be confused with voice recording.
Brief door impacts create repeated high-noise alarms.Appropriate time weighting and alarm delay reduce response to momentary events.
Microphone dust protection changes the acoustic response.An acoustically specified protective cap maintains airflow while shielding the element.
Staff assume the device records conversations.The output is limited to sound-level data and status rather than audio content.
A rising fan or bearing noise is noticed only after failure.Long-term dB trends reveal persistent changes relative to the established room baseline.
Aplicaciones típicas
Cleanroom equipment noise trendingLaboratory acoustic monitoringOperator comfort assessmentFan and bearing condition indication
Parámetros técnicos
Typical construction values for a fixed cleanroom noise level sensor are shown below.
| Materiales Core | Electret or MEMS measurement microphone with FR-4 processor board in polycarbonate enclosure |
|---|---|
| Panel de espesor | 35-70 mm transmitter depth |
| Ancho efectivo | 90-150 mm housing width |
| Longitud máxima | Up to 220 mm housing length with microphone head |
| Acero frente a espesor | 0-0.8 mm; optional stainless microphone guard |
| Densidad Core | 1180-1220 kg/m³ for polycarbonate transmitter housing |
| Conductividad térmica | 0.19-0.22 W/(m·K) for polycarbonate enclosure material |
| Superficie acabada | Smooth white housing with black acoustic cap and blue status indicator |
| Tipo conjunto | Wall or ceiling bracket with replaceable microphone cap and rear output terminal |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
A or C frequency weightingFast or slow time weightingAnalog or digital outputLocal alarm indicator
Planning a Noise Sensor specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
