Complete white cleanroom noise level sensor with black measurement microphone cap

클린룸 제어 및 환경 모니터링 시스템 (Cleanroom Control and Environment Monitoring Systems)

노이즈 센서

A fixed sound-level sensor that converts cleanroom acoustic pressure into a continuous weighted noise value for trend monitoring and alarms.

Measurement Microphone
Continuous dB Output
Frequency and Time Weighting
Remote Alarm Integration

견적 요청 제품 찾아보기

상품 소개

The cleanroom noise level sensor combines a measurement microphone, preamplifier and digital signal processing in a wall or ceiling transmitter. Selected frequency and time weighting produce a consistent sound-level value for room trends, occupational studies or equipment-noise alarms. The microphone is protected by an acoustically transparent cap that can be inspected or replaced. Analog and digital outputs transfer the measured level without streaming room audio, preserving the function as a sound-pressure monitor rather than a recording device.

주요 기능

A calibrated measurement microphone responds predictably across the selected acoustic band.

Configurable frequency and time weighting supports different monitoring objectives.

Continuous dB output reveals gradual equipment-noise changes as well as threshold events.

The transmitter reports numeric sound level without capturing intelligible audio recordings.

고객 제품 관심사

Fixed noise monitoring must distinguish meaningful changes from short impacts and must not be confused with voice recording.

Brief door impacts create repeated high-noise alarms.Appropriate time weighting and alarm delay reduce response to momentary events.

Microphone dust protection changes the acoustic response.An acoustically specified protective cap maintains airflow while shielding the element.

Staff assume the device records conversations.The output is limited to sound-level data and status rather than audio content.

A rising fan or bearing noise is noticed only after failure.Long-term dB trends reveal persistent changes relative to the established room baseline.

일반적인 응용 프로그램

Cleanroom equipment noise trendingLaboratory acoustic monitoringOperator comfort assessmentFan and bearing condition indication

기술 매개변수

Typical construction values for a fixed cleanroom noise level sensor are shown below.

핵심 재료	Electret or MEMS measurement microphone with FR-4 processor board in polycarbonate enclosure
패널 두께	35-70 mm transmitter depth
유효 폭	90-150 mm housing width
최대 길이	Up to 220 mm housing length with microphone head
강철 면면 두께	0-0.8 mm; optional stainless microphone guard
코어 밀도	1180-1220 kg/m³ for polycarbonate transmitter housing
열전도도 (Thermal Conductivity)	0.19-0.22 W/(m·K) for polycarbonate enclosure material
표면 마무리	Smooth white housing with black acoustic cap and blue status indicator
접합 유형	Wall or ceiling bracket with replaceable microphone cap and rear output terminal
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

A or C frequency weightingFast or slow time weightingAnalog or digital outputLocal alarm indicator

Planning a Noise Sensor specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.