Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Filtro de aire y filtración química
Filtro de panel pleated de eficiencia media
A deeper mechanical-media panel that raises fine-particle capture above a coarse prefilter while retaining a standard HVAC filter footprint.
- Mechanical Synthetic Media
- MERV 11-13 Range
- Corrosion-Resistant Wire Backing
- Sealed Rigid Frame
Introducción del producto
The medium-efficiency pleated panel filter uses a fine synthetic mechanical medium formed into uniform radial pleats and bonded to a downstream support grid. Higher fiber density and increased pleat count improve capture of smaller airborne particles compared with a coarse panel, while the expanded surface keeps resistance manageable. The enclosing frame includes diagonal stabilizers and a continuous media bond to prevent bypass. One-, two- and four-inch nominal depths allow the filter to serve as an intermediate stage or as a compact final filter in non-critical ventilation.
Características clave
Uniform pleat spacing balances media area with open airflow channels.
A downstream wire backing controls media movement through fan cycling and variable airflow.
Continuous bonding between media and frame closes edge bypass around the pleated pack.
Preocupaciones del producto del cliente
A medium-efficiency panel must provide sustained particle capture without excessive pleat crowding or edge leakage.
Charged media loses part of its efficiency as the electrostatic effect dissipates.A mechanical fiber blend provides stable capture through the normal loading cycle.
Adding finer media causes an unacceptable increase in fan pressure demand.The deeper pleated geometry expands media area and lowers the velocity through each square metre.
Pleats flutter and release retained dust during variable-air-volume operation.Bonded wire support and diagonal frame members keep the pack stable as airflow changes.
Air leaks around the panel because the rack face is uneven.A square rigid frame with optional perimeter gasket provides a continuous compression surface.
Aplicaciones típicas
Second-stage commercial HVAC filtrationCleanroom make-up-air pre-filtrationHospital and laboratory support areasRooftop and packaged unitsProtection for compact and HEPA final filters
Parámetros técnicos
Typical construction ranges for a medium-efficiency pleated panel filter are shown below.
| Materiales Core | Fine synthetic mechanical media bonded to a corrosion-resistant expanded-wire support |
|---|---|
| Panel de espesor | 22, 45 or 95 mm actual depth |
| Ancho efectivo | 289-610 mm standard face width |
| Longitud máxima | Up to 610 mm standard face length |
| Acero frente a espesor | 0.30-0.45 mm corrosion-resistant expanded-wire backing |
| Densidad Core | Approximately 40-80 kg/m³ nominal fine-media bulk density |
| Conductividad térmica | Approximately 0.035-0.045 W/(m·K) for the dry synthetic media |
| Superficie acabada | White mechanical media with galvanized support and moisture-resistant board or metal frame |
| Tipo conjunto | Radially pleated media bonded to a support grid and continuously sealed into a rigid panel frame |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
MERV 11, MERV 13 or comparable ISO 16890 grade22 mm compact, 45 mm standard or 95 mm high-capacity pleat packBoard, molded plastic or galvanized perimeter frameUpstream or downstream compression gasket
Planning a Medium-Efficiency Pleated Panel Filter specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
