Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Luftfilter und chemische Filtration
Medium Efficiency Pleated Panel Filter
A deeper mechanical-media panel that raises fine-particle capture above a coarse prefilter while retaining a standard HVAC filter footprint.
- Mechanical Synthetic Media
- MERV 11-13 Range
- Corrosion-Resistant Wire Backing
- Sealed Rigid Frame
Produkteinführung
The medium-efficiency pleated panel filter uses a fine synthetic mechanical medium formed into uniform radial pleats and bonded to a downstream support grid. Higher fiber density and increased pleat count improve capture of smaller airborne particles compared with a coarse panel, while the expanded surface keeps resistance manageable. The enclosing frame includes diagonal stabilizers and a continuous media bond to prevent bypass. One-, two- and four-inch nominal depths allow the filter to serve as an intermediate stage or as a compact final filter in non-critical ventilation.
Key Features
Uniform pleat spacing balances media area with open airflow channels.
A downstream wire backing controls media movement through fan cycling and variable airflow.
Continuous bonding between media and frame closes edge bypass around the pleated pack.
Kunden Produktbedenken
A medium-efficiency panel must provide sustained particle capture without excessive pleat crowding or edge leakage.
Charged media loses part of its efficiency as the electrostatic effect dissipates.A mechanical fiber blend provides stable capture through the normal loading cycle.
Adding finer media causes an unacceptable increase in fan pressure demand.The deeper pleated geometry expands media area and lowers the velocity through each square metre.
Pleats flutter and release retained dust during variable-air-volume operation.Bonded wire support and diagonal frame members keep the pack stable as airflow changes.
Air leaks around the panel because the rack face is uneven.A square rigid frame with optional perimeter gasket provides a continuous compression surface.
Typische Anwendungen
Second-stage commercial HVAC filtrationCleanroom make-up-air pre-filtrationHospital and laboratory support areasRooftop and packaged unitsProtection for compact and HEPA final filters
Technische Parameter
Typical construction ranges for a medium-efficiency pleated panel filter are shown below.
| Core Material | Fine synthetic mechanical media bonded to a corrosion-resistant expanded-wire support |
|---|---|
| Panel Dicke | 22, 45 or 95 mm actual depth |
| Effektive Breite | 289-610 mm standard face width |
| Maximale Länge | Up to 610 mm standard face length |
| Stahl facing Dicke | 0.30-0.45 mm corrosion-resistant expanded-wire backing |
| Kerndichte | Approximately 40-80 kg/m³ nominal fine-media bulk density |
| Thermische Leitfähigkeit | Approximately 0.035-0.045 W/(m·K) for the dry synthetic media |
| Oberfläche Finish | White mechanical media with galvanized support and moisture-resistant board or metal frame |
| Gemeinsamer Typ | Radially pleated media bonded to a support grid and continuously sealed into a rigid panel frame |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
MERV 11, MERV 13 or comparable ISO 16890 grade22 mm compact, 45 mm standard or 95 mm high-capacity pleat packBoard, molded plastic or galvanized perimeter frameUpstream or downstream compression gasket
Planning a Medium-Efficiency Pleated Panel Filter specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
