Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Accesorios de instalación de sala limpia
Puerto de prueba de filtro HEPA
A room-side stainless bulkhead test port with a quick coupling, tethered cap and rear hose barb for controlled pressure or aerosol sampling at HEPA housings.
- Room-Side Quick Connection
- Tethered Metal Dust Cap
- Threaded Bulkhead Mount
- Barbed Tubing Interface
Introducción del producto
The HEPA filter test port combines a machined stainless quick-coupling socket with a two-hole face flange, threaded bulkhead, hex locknut and rear hose barb. Installed through a terminal housing or test-panel wall, it creates a defined connection between room-side test equipment and the intended pressure or aerosol line. The separate knurled cap remains attached by a short chain, protecting the exposed socket between validation activities without becoming a loose service item.
Características clave
A broad circular flange with two countersunk holes stabilizes the fitting against the housing face.
The rear male thread and hex locknut clamp the bulkhead securely through a prepared panel opening.
A stepped hose barb supports a direct transition to a correctly sized flexible sampling or injection line.
The knurled protective cap stays captured by a stainless chain during testing and servicing.
Preocupaciones del producto del cliente
HEPA validation connections must remain accessible for instruments while preserving a secure, cleanable interface between test cycles.
Reaching an upstream plenum directly can require grille removal or awkward access above the cleanroom ceiling.The bulkhead fitting places a dedicated quick connection at the accessible room-side face.
An exposed socket can collect residue or become an unintended leakage path between test cycles.The close-fitting knurled cap protects the interface and remains captured by its short tether chain.
A poorly matched flexible tube can slip from the fitting or restrict the test flow path.The stepped rear barb is selected to suit the test-line bore and provides multiple retention lands.
A single-point fitting may rotate or leak where it passes through a thin housing wall.The two-hole flange resists rotation while the threaded bulkhead and locknut maintain controlled panel compression.
Aplicaciones típicas
Upstream aerosol concentration sampling at terminal HEPA housingsDownstream sampling circuits for exhaust-filter test fixturesStatic-pressure measurement at cleanroom filter plenumsChallenge-aerosol connection points in compatible validation arrangementsRoom-side access for ceiling and wall HEPA filter testing
Parámetros técnicos
Typical material and dimensional ranges for a stainless bulkhead HEPA filter test port are listed below.
| Materiales Core | Machined 304 or optional 316L stainless-steel flange, coupling, bulkhead, locknut, hose barb and tethered cap |
|---|---|
| Panel de espesor | 0.8-3.0 mm compatible HEPA housing or test-panel wall thickness |
| Ancho efectivo | 6-12 mm nominal test-line bore or compatible hose inside diameter |
| Longitud máxima | Up to 120 mm overall bulkhead and hose-barb length |
| Acero frente a espesor | 2.0-5.0 mm nominal circular mounting-flange thickness |
| Densidad Core | Approximately 7900-8000 kg/m³ for austenitic stainless steel |
| Conductividad térmica | Approximately 14-17 W/(m·K) for austenitic stainless steel |
| Superficie acabada | Brushed, satin-machined or passivated natural stainless-steel finish |
| Tipo conjunto | Two-hole face flange with thread-locked bulkhead, front quick coupling and rear barbed tube connection |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
304 or 316L stainless-steel constructionQuick-coupling and hose-barb sizes matched to test tubingEPDM or silicone flange gasketCustom two-hole flange pattern and bulkhead lengthStraight or elbow rear tube connection
Planning a HEPA Filter Test Port specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
