Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Filtro de aire y filtración química
Filtro Gel-Seal ULPA por
A U-class mini-pleat panel with a continuous polyurethane or silicone gel channel that forms a compliant seal around a cleanroom terminal knife edge.
- Continuous Fluid-Gel Seal
- Knife-Edge Housing Interface
- U15 Media Option
- Cleanroom Terminal Format
Introducción del producto
The gel-seal ULPA filter combines a high-efficiency mini-pleat microglass pack with a continuous fluid-gel trough in the aluminium frame. When the terminal housing's knife edge enters the gel, the compliant material surrounds small surface variations and forms a reusable sealing path without high gasket compression. The media pack is separately bonded into the frame with polyurethane, and protective grids shield both filter faces. This arrangement is widely used in cleanroom ceilings and fan filter units where a consistent perimeter seal must be achieved during repeated filter changes.
Características clave
The perimeter seal requires less compression force than a conventional dry gasket on a large panel.
Separate media-pack potting isolates the filtration seal from the serviceable gel channel.
Rounded aluminium corners and uninterrupted gel continuity reduce vulnerable transitions at frame joints.
Preocupaciones del producto del cliente
A very high-efficiency terminal filter can still fail its purpose if the large perimeter seal is uneven or difficult to reproduce after replacement.
A dry gasket needs excessive clamping pressure to seal a large ceiling panel.The knife edge displaces compliant gel and forms a continuous seal with low closure force.
Small housing flange irregularities create isolated bypass paths.Fluid gel flows locally around the knife edge and fills minor surface variations.
Gel migration contaminates the visible filter face.A correctly sized enclosed trough retains the selected polyurethane or silicone gel within the frame perimeter.
The seal is broken when the panel is removed for service.The gel can close around the knife-edge withdrawal path when handled within its service limits.
Aplicaciones típicas
Semiconductores Cleanroom TechoPharmaceutical unidirectional-flow zonesFan filter units with knife-edge housingsSterile compounding areasUltra-clean process-tool enclosures
Parámetros técnicos
Typical construction ranges for a knife-edge gel-seal ULPA panel are listed below.
| Materiales Core | Ultra-fine glass-microfibre ULPA media with thermoplastic mini-pleat separators |
|---|---|
| Panel de espesor | 80–150 mm overall frame depth including gel channel |
| Ancho efectivo | 305 - 610 mm Ancho nominal de cara |
| Longitud máxima | Hasta 1220 mm de longitud nominal de cara por |
| Acero frente a espesor | 0.4–0.6 mm coated-steel or stainless-steel protective faceguard |
| Densidad Core | Approximately 35–55 kg/m³ equivalent ULPA media-pack density |
| Conductividad térmica | Approximately 0.035–0.045 W/(m·K) for the dry microglass pack |
| Superficie acabada | Natural anodized aluminium with clean white or stainless protective grids |
| Tipo conjunto | Continuous polyurethane or silicone gel channel for a mating terminal knife edge |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
U15 or U16 filtration classPolyurethane or silicone gelUpstream or downstream gel-trough orientationSingle-face or dual-face protective grid
Planning a Gel-Seal ULPA Filter specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
