Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de HVAC y manejo de aire para salas limpias
Ventilador de escape resistente a la corrosión FRP
A roof-upblast or sidewall centrifugal exhaust fan with molded FRP wetted parts for corrosive laboratory and process air.
- 12–40 in. Fan Series
- 200–35,000 CFM Range
- Up to 2.5 in. w.g.
- Roof or Sidewall Mounting
Introducción del producto
The fan uses a molded dome housing and a single-piece backward-inclined impeller reinforced with glass fiber in a corrosion-resistant vinyl-ester resin system. Its scroll has a smooth, resin-rich internal surface, while UV inhibitors protect the external molding in outdoor service. Hardware exposed to the exhaust path is encapsulated in FRP, and the carbon-steel shaft is isolated by the impeller hub, an internal FRP cap and an O-ring. A neoprene hub seal is standard, with a PTFE seal available for more severe chemical environments.
Características clave
Direct-drive and belt-drive arrangements allow the motor selection and service layout to suit the required duty point and installation space.
Dedicated openings draw ambient cooling air through the motor cover instead of using contaminated exhaust air for motor ventilation.
Available roof curbs, bird screens, flexible connectors and vibration isolators complete the weather-side and duct-side installation interfaces.
Preocupaciones del producto del cliente
Reliable corrosive exhaust depends on matching the resin, fan duty and installation details to the actual gas composition and duct system.
A resin that tolerates one acid may soften or blister in a different solvent, concentration or temperature.Select the vinyl-ester resin and any optional liner from the actual chemical composition, concentration and exhaust temperature.
Choosing the fan only by duct diameter can leave insufficient airflow once filters, elbows and stacks add resistance.Size the wheel and motor from the scheduled airflow and total static pressure on the published fan curve, including accessory losses.
Condensate pools at the bottom of the scroll and concentrates aggressive chemicals.Place the drain at the true low point, route it to a compatible disposal connection and include the scroll in the wash-down schedule.
An undersized roof curb or rigid duct connection transfers wind and fan vibration into the building structure.Match the curb opening and support dimensions to the selected fan size and use a flexible connector plus correctly rated isolators.
Aplicaciones típicas
Pharmaceutical laboratory fume exhaustChemical storage and blending roomsWastewater and odor-control stationsBattery production exhaust systemsPool and high-humidity corrosive ventilation
Parámetros técnicos
Typical construction ranges for an industrial FRP centrifugal exhaust fan are listed below.
| Materiales Core | Vinyl-ester fiberglass-reinforced plastic housing and impeller with external metallic drive support |
|---|---|
| Panel de espesor | 5–12 mm nominal molded FRP structural laminate, with local reinforcement at flanges and supports |
| Ancho efectivo | 780–1690 mm overall fan width across the 12–40 in. RBK size range |
| Longitud máxima | Up to 1702 mm overall roof-upblast fan height |
| Acero frente a espesor | 1.2 mm (18-gauge) galvanized steel roof-curb sheet; fiberglass curb construction is optional |
| Densidad Core | 1500–1900 kg/m³ cured FRP laminate |
| Conductividad térmica | 0.25–0.40 W/(m·K) for the FRP laminate |
| Superficie acabada | Smooth resin-rich interior with a UV-inhibited exterior gel coat in gray, safety orange or a selected industrial color |
| Tipo conjunto | Molded curb-cap or sidewall interface with duct transition, neoprene or PTFE hub seal and FRP-isolated shaft penetration |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Direct-drive or belt-drive arrangementRoof-upblast or sidewall discharge configurationAlternative resin system for the exhaust chemistryDrain fitting, flexible connector and vibration isolators
Planning a FRP Corrosion-Resistant Exhaust Fan specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
