Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Salle blanche HVAC et équipement de manutention de l'air
FRP
A roof-upblast or sidewall centrifugal exhaust fan with molded FRP wetted parts for corrosive laboratory and process air.
- 12–40 in. Fan Series
- 200–35,000 CFM Range
- Up to 2.5 in. w.g.
- Roof or Sidewall Mounting
Introduction de produit
The fan uses a molded dome housing and a single-piece backward-inclined impeller reinforced with glass fiber in a corrosion-resistant vinyl-ester resin system. Its scroll has a smooth, resin-rich internal surface, while UV inhibitors protect the external molding in outdoor service. Hardware exposed to the exhaust path is encapsulated in FRP, and the carbon-steel shaft is isolated by the impeller hub, an internal FRP cap and an O-ring. A neoprene hub seal is standard, with a PTFE seal available for more severe chemical environments.
Key Features
Direct-drive and belt-drive arrangements allow the motor selection and service layout to suit the required duty point and installation space.
Dedicated openings draw ambient cooling air through the motor cover instead of using contaminated exhaust air for motor ventilation.
Available roof curbs, bird screens, flexible connectors and vibration isolators complete the weather-side and duct-side installation interfaces.
Préoccupations du client produit
Reliable corrosive exhaust depends on matching the resin, fan duty and installation details to the actual gas composition and duct system.
A resin that tolerates one acid may soften or blister in a different solvent, concentration or temperature.Select the vinyl-ester resin and any optional liner from the actual chemical composition, concentration and exhaust temperature.
Choosing the fan only by duct diameter can leave insufficient airflow once filters, elbows and stacks add resistance.Size the wheel and motor from the scheduled airflow and total static pressure on the published fan curve, including accessory losses.
Condensate pools at the bottom of the scroll and concentrates aggressive chemicals.Place the drain at the true low point, route it to a compatible disposal connection and include the scroll in the wash-down schedule.
An undersized roof curb or rigid duct connection transfers wind and fan vibration into the building structure.Match the curb opening and support dimensions to the selected fan size and use a flexible connector plus correctly rated isolators.
Les applications typiques
Pharmaceutical laboratory fume exhaustChemical storage and blending roomsWastewater and odor-control stationsBattery production exhaust systemsPool and high-humidity corrosive ventilation
Paramètres techniques
Typical construction ranges for an industrial FRP centrifugal exhaust fan are listed below.
| Matériaux de base | Vinyl-ester fiberglass-reinforced plastic housing and impeller with external metallic drive support |
|---|---|
| Panneau épaisseur | 5–12 mm nominal molded FRP structural laminate, with local reinforcement at flanges and supports |
| Largeur effective | 780–1690 mm overall fan width across the 12–40 in. RBK size range |
| Longueur maximale | Up to 1702 mm overall roof-upblast fan height |
| Acier face épaisseur | 1.2 mm (18-gauge) galvanized steel roof-curb sheet; fiberglass curb construction is optional |
| Densité Core | 1500–1900 kg/m³ cured FRP laminate |
| Conductivité thermique | 0.25–0.40 W/(m·K) for the FRP laminate |
| surface finie | Smooth resin-rich interior with a UV-inhibited exterior gel coat in gray, safety orange or a selected industrial color |
| Type joint | Molded curb-cap or sidewall interface with duct transition, neoprene or PTFE hub seal and FRP-isolated shaft penetration |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Direct-drive or belt-drive arrangementRoof-upblast or sidewall discharge configurationAlternative resin system for the exhaust chemistryDrain fitting, flexible connector and vibration isolators
Planning a FRP Corrosion-Resistant Exhaust Fan specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
