Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Instrumentación de prueba y validación de sala limpia
Generador de aerosol frío
A portable Laskin-nozzle generator that atomizes compatible test liquid without heat to provide a stable polydisperse challenge aerosol for in-situ filter integrity testing.
- Repeatable cold aerosol without a heating cycle.
- Selectable Laskin nozzles for adaptable challenge output.
- Portable stainless construction for field validation.
Introducción del producto
This cold aerosol generator uses regulated compressed air and immersed Laskin nozzles to entrain test liquid and create a repeatable submicron aerosol without a heating cycle. Selectable nozzle operation lets technicians match aerosol output to smaller cabinets or larger air-handling systems. A sealed liquid reservoir, pressure indication and serviceable stainless outlet path make the instrument practical for cleanroom qualification and routine HEPA or ULPA leak testing.
Características clave
Selectable Laskin nozzles provide stepped output for different system airflows.
Regulated pressure indication helps reproduce operating conditions between tests.
Internal baffles reduce the carryover of oversized liquid droplets.
Sealed reservoir and drain connection simplify filling, recovery and transport.
Portable corrosion-resistant enclosure supports field certification work.
Preocupaciones del producto del cliente
Reliable cold aerosol testing depends on controlled air pressure, appropriate droplet separation and enough output flexibility for different filter-system airflows.
A fixed aerosol output may be excessive for a small cabinet and insufficient for a large plenum.Independently selectable nozzles provide practical output steps that can be matched to system airflow.
Changing compressed-air pressure can make challenge concentration difficult to reproduce.A regulator and clearly visible pressure gauge establish a repeatable nozzle operating point.
Large liquid droplets can contaminate ductwork or destabilize the photometer reading.Immersed nozzles and an internal impingement baffle retain coarse droplets in the reservoir.
Residual test liquid may leak during movement between validation locations.A sealed fill cap, level guidance and drainable reservoir support controlled filling and transport.
Aplicaciones típicas
In-situ HEPA and ULPA filter leak testingCertificación de Gabinete de Seguridad Biológica
porCleanroom ceiling module qualificationNegative-pressure filtration unit testingUpstream challenge generation for aerosol photometers
Parámetros técnicos
The following values describe common portable Laskin-nozzle construction; nozzle quantity, dimensions and air requirements can be configured for the intended test range.
| Materiales Core | Stainless-steel liquid reservoir with immersed Laskin nozzles, internal baffle and regulated compressed-air manifold |
|---|---|
| Panel de espesor | Typically 1.0-1.5 mm for the protective stainless enclosure |
| Ancho efectivo | Approximately 220-380 mm according to nozzle count and compressor configuration |
| Longitud máxima | Approximately 300-520 mm including outlet, controls and carrying handle |
| Acero frente a espesor | Typically 1.0-1.5 mm stainless steel |
| Densidad Core | Approximately 7900-8000 kg/m³ for the stainless reservoir and nozzle assembly |
| Conductividad térmica | Approximately 14-17 W/(m·K) for the stainless-steel liquid vessel |
| Superficie acabada | Fine-brushed stainless steel with black pressure controls, elastomer feet and sealed labels |
| Tipo conjunto | Threaded fill cap, regulated compressed-air inlet and clamp-compatible aerosol outlet |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
One, two, four or six-nozzle configurationsIntegrated compressor or external compressed-air supplyPAO, DEHS or other compatible test-liquid setupFlexible aerosol delivery hosePositive-pressure injection accessoryProtective transport case
Planning a Cold Aerosol Generator specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
