Cold aerosol generator in three-quarter front view on a white background

クリーンルーム試験 · 検証機器

冷たいエアロゾル発生器

A portable Laskin-nozzle generator that atomizes compatible test liquid without heat to provide a stable polydisperse challenge aerosol for in-situ filter integrity testing.

Repeatable cold aerosol without a heating cycle.
Selectable Laskin nozzles for adaptable challenge output.
Portable stainless construction for field validation.

見積もりリクエスト製品案内

商品紹介

This cold aerosol generator uses regulated compressed air and immersed Laskin nozzles to entrain test liquid and create a repeatable submicron aerosol without a heating cycle. Selectable nozzle operation lets technicians match aerosol output to smaller cabinets or larger air-handling systems. A sealed liquid reservoir, pressure indication and serviceable stainless outlet path make the instrument practical for cleanroom qualification and routine HEPA or ULPA leak testing.

主要な特徴

Cold atomization avoids thermal decomposition of compatible aerosol liquids.

Selectable Laskin nozzles provide stepped output for different system airflows.

Regulated pressure indication helps reproduce operating conditions between tests.

Internal baffles reduce the carryover of oversized liquid droplets.

Sealed reservoir and drain connection simplify filling, recovery and transport.

Portable corrosion-resistant enclosure supports field certification work.

お客様の製品に関する懸念事項

Reliable cold aerosol testing depends on controlled air pressure, appropriate droplet separation and enough output flexibility for different filter-system airflows.

A fixed aerosol output may be excessive for a small cabinet and insufficient for a large plenum.Independently selectable nozzles provide practical output steps that can be matched to system airflow.

Changing compressed-air pressure can make challenge concentration difficult to reproduce.A regulator and clearly visible pressure gauge establish a repeatable nozzle operating point.

Large liquid droplets can contaminate ductwork or destabilize the photometer reading.Immersed nozzles and an internal impingement baffle retain coarse droplets in the reservoir.

Residual test liquid may leak during movement between validation locations.A sealed fill cap, level guidance and drainable reservoir support controlled filling and transport.

典型的な用途

In-situ HEPA and ULPA filter leak testing生物安全キャビネット認証Cleanroom ceiling module qualificationNegative-pressure filtration unit testingUpstream challenge generation for aerosol photometers

技術的なパラメータ

The following values describe common portable Laskin-nozzle construction; nozzle quantity, dimensions and air requirements can be configured for the intended test range.

コア材料	Stainless-steel liquid reservoir with immersed Laskin nozzles, internal baffle and regulated compressed-air manifold
パネルの厚さ	Typically 1.0-1.5 mm for the protective stainless enclosure
有効幅	Approximately 220-380 mm according to nozzle count and compressor configuration
最大長さ	Approximately 300-520 mm including outlet, controls and carrying handle
鋼鉄の厚さを直面する	Typically 1.0-1.5 mm stainless steel
コア密度	Approximately 7900-8000 kg/m³ for the stainless reservoir and nozzle assembly
熱伝導率	Approximately 14-17 W/(m·K) for the stainless-steel liquid vessel
表面仕上げ	Fine-brushed stainless steel with black pressure controls, elastomer feet and sealed labels
ジョイントタイプ	Threaded fill cap, regulated compressed-air inlet and clamp-compatible aerosol outlet
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

One, two, four or six-nozzle configurationsIntegrated compressor or external compressed-air supplyPAO, DEHS or other compatible test-liquid setupFlexible aerosol delivery hosePositive-pressure injection accessory保護輸送ケース

Planning a Cold Aerosol Generator specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する