Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Puertas de sala limpia, ventanas y sistemas de bloqueo
Indicador de estado de puerta de sala limpia
A three-color visual indicator that communicates whether a controlled cleanroom door is available, changing state or locked by the interlock sequence.
- Green Amber Red Signals
- High-Visibility Lenses
- Stainless Front Plate
- Relay or Controller Input
Introducción del producto
The cleanroom door status indicator groups green, amber and red LED lenses in a compact stainless wall plate. The interlock controller or access system drives each circuit to communicate door availability, transition or restricted status before a user touches the opening. The wide diffused lenses remain visible from the corridor, while the sealed front and removable rear terminal simplify integration beside single doors and multi-door airlocks.
Características clave
Diffused lenses distribute light across a wide viewing angle in bright corridors.
The brushed stainless front plate tolerates regular wipe-down around controlled entrances.
Independent low-voltage inputs allow the display logic to be assigned by the interlock controller.
Preocupaciones del producto del cliente
Users need to understand the door sequence before attempting entry, especially when another airlock leaf is already active.
Personnel pull a locked interlock door because its state is not obvious from the corridor.Large green, amber and red lenses display the controller state before contact with the handle.
Small indicator LEDs disappear under bright cleanroom lighting.Diffused high-area lenses remain visible across a wider approach angle.
One combined lamp cannot distinguish a transition from a restricted state.Three independent circuits support separate available, waiting and locked signals.
Aplicaciones típicas
Personnel airlock entrancesMaterial de puertas AirlockCleanroom corridor accessLaboratory containment doors
Parámetros técnicos
Typical enclosure dimensions and materials for a three-color cleanroom door status panel are listed below.
| Materiales Core | Green, amber and red LED modules on an FR-4 driver and terminal board |
|---|---|
| Panel de espesor | Approximately 40–50 mm installed enclosure depth |
| Ancho efectivo | Approximately 85–100 mm front-plate width |
| Longitud máxima | Approximately 180–220 mm overall plate length |
| Acero frente a espesor | 1.2–1.5 mm brushed stainless-steel front plate |
| Densidad Core | Approximately 1850 kg/m³ for the FR-4 driver-board laminate |
| Conductividad térmica | Approximately 0.25–0.35 W/(m·K) for the FR-4 electronic core |
| Superficie acabada | Brushed stainless steel with green, amber and red polycarbonate lenses |
| Tipo conjunto | Flush or surface wall mounting with sealed plate and independent terminal inputs |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
12 or 24 VDC LED modulesTwo- or three-color configurationVertical or horizontal plateBuzzer output and controller terminal set
Planning a Cleanroom Door Status Indicator specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
