Three-color cleanroom door status indicator with rear terminal enclosure

クリーンルームのドア、窓およびインターロックシステム

クリーンルームドアステータス表示器

A three-color visual indicator that communicates whether a controlled cleanroom door is available, changing state or locked by the interlock sequence.

Green Amber Red Signals
High-Visibility Lenses
Stainless Front Plate
Relay or Controller Input

見積もりリクエスト製品案内

商品紹介

The cleanroom door status indicator groups green, amber and red LED lenses in a compact stainless wall plate. The interlock controller or access system drives each circuit to communicate door availability, transition or restricted status before a user touches the opening. The wide diffused lenses remain visible from the corridor, while the sealed front and removable rear terminal simplify integration beside single doors and multi-door airlocks.

主要な特徴

Three physically separated LED colors provide an immediate state indication without relying on text.

Diffused lenses distribute light across a wide viewing angle in bright corridors.

The brushed stainless front plate tolerates regular wipe-down around controlled entrances.

Independent low-voltage inputs allow the display logic to be assigned by the interlock controller.

お客様の製品に関する懸念事項

Users need to understand the door sequence before attempting entry, especially when another airlock leaf is already active.

Personnel pull a locked interlock door because its state is not obvious from the corridor.Large green, amber and red lenses display the controller state before contact with the handle.

Small indicator LEDs disappear under bright cleanroom lighting.Diffused high-area lenses remain visible across a wider approach angle.

One combined lamp cannot distinguish a transition from a restricted state.Three independent circuits support separate available, waiting and locked signals.

典型的な用途

Personnel airlock entrances材料エアロックドアCleanroom corridor accessLaboratory containment doors

技術的なパラメータ

Typical enclosure dimensions and materials for a three-color cleanroom door status panel are listed below.

コア材料	Green, amber and red LED modules on an FR-4 driver and terminal board
パネルの厚さ	Approximately 40–50 mm installed enclosure depth
有効幅	Approximately 85–100 mm front-plate width
最大長さ	Approximately 180–220 mm overall plate length
鋼鉄の厚さを直面する	1.2–1.5 mm brushed stainless-steel front plate
コア密度	Approximately 1850 kg/m³ for the FR-4 driver-board laminate
熱伝導率	Approximately 0.25–0.35 W/(m·K) for the FR-4 electronic core
表面仕上げ	Brushed stainless steel with green, amber and red polycarbonate lenses
ジョイントタイプ	Flush or surface wall mounting with sealed plate and independent terminal inputs
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

12 or 24 VDC LED modulesTwo- or three-color configurationVertical or horizontal plateBuzzer output and controller terminal set

Planning a Cleanroom Door Status Indicator specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する