Three-color cleanroom door status indicator with rear terminal enclosure

클린룸 도어, 창문 및 인터락 시스템

클린룸 도어 상태 표시기

A three-color visual indicator that communicates whether a controlled cleanroom door is available, changing state or locked by the interlock sequence.

Green Amber Red Signals
High-Visibility Lenses
Stainless Front Plate
Relay or Controller Input

견적 요청 제품 찾아보기

상품 소개

The cleanroom door status indicator groups green, amber and red LED lenses in a compact stainless wall plate. The interlock controller or access system drives each circuit to communicate door availability, transition or restricted status before a user touches the opening. The wide diffused lenses remain visible from the corridor, while the sealed front and removable rear terminal simplify integration beside single doors and multi-door airlocks.

주요 기능

Three physically separated LED colors provide an immediate state indication without relying on text.

Diffused lenses distribute light across a wide viewing angle in bright corridors.

The brushed stainless front plate tolerates regular wipe-down around controlled entrances.

Independent low-voltage inputs allow the display logic to be assigned by the interlock controller.

고객 제품 관심사

Users need to understand the door sequence before attempting entry, especially when another airlock leaf is already active.

Personnel pull a locked interlock door because its state is not obvious from the corridor.Large green, amber and red lenses display the controller state before contact with the handle.

Small indicator LEDs disappear under bright cleanroom lighting.Diffused high-area lenses remain visible across a wider approach angle.

One combined lamp cannot distinguish a transition from a restricted state.Three independent circuits support separate available, waiting and locked signals.

일반적인 응용 프로그램

Personnel airlock entrances공기 잠금 문Cleanroom corridor accessLaboratory containment doors

기술 매개변수

Typical enclosure dimensions and materials for a three-color cleanroom door status panel are listed below.

핵심 재료	Green, amber and red LED modules on an FR-4 driver and terminal board
패널 두께	Approximately 40–50 mm installed enclosure depth
유효 폭	Approximately 85–100 mm front-plate width
최대 길이	Approximately 180–220 mm overall plate length
강철 면면 두께	1.2–1.5 mm brushed stainless-steel front plate
코어 밀도	Approximately 1850 kg/m³ for the FR-4 driver-board laminate
열전도도 (Thermal Conductivity)	Approximately 0.25–0.35 W/(m·K) for the FR-4 electronic core
표면 마무리	Brushed stainless steel with green, amber and red polycarbonate lenses
접합 유형	Flush or surface wall mounting with sealed plate and independent terminal inputs
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

12 or 24 VDC LED modulesTwo- or three-color configurationVertical or horizontal plateBuzzer output and controller terminal set

Planning a Cleanroom Door Status Indicator specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.