English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Обработка и хранение материалов в чистых помещениях
Ламинарная корзина передачи потока
A battery-powered laminar flow transfer cart that maintains a continuously filtered protective air zone around sensitive materials during internal transport.
- Mobile HEPA-filtered protection for contamination-sensitive loads
- Battery-backed airflow during movement between classified areas
- Welded stainless enclosure with monitored fan and filter system
Введение продукции
The cart integrates a stainless mobile enclosure with a top-mounted fan/filter module, unidirectional air diffuser, transparent access doors and adjustable shelves. An onboard battery and charger allow airflow to continue away from a wall supply, while pressure and operating indicators help personnel confirm system status.
Основные характеристики
Battery and charging system supports mobile operation.
Transparent doors provide load visibility without opening the chamber.
Removable shelves adapt the protected zone to varied containers.
Smooth welded surfaces and sealed casters support controlled-area cleaning.
Обеспокоенность клиентов продуктами
Sensitive products can lose environmental protection while crossing lower-grade corridors or waiting between process steps.
Airborne contamination during movementContinuous HEPA-filtered airflow maintains a protected product zone.
Loss of airflow away from mains powerThe onboard battery supplies the fan during mobile operation.
Unnoticed filter loading or airflow declineDifferential-pressure and operating indicators provide status visibility.
Different load formatsRemovable height-adjustable shelves configure the chamber around the payload.
Типичные приложения
Aseptic component transfer, sterile consumable movement, filling-line support and contamination-sensitive transport across pharmaceutical, biotechnology and medical-device facilities.
Технические параметры
Vertical or horizontal airflow geometry is selected to suit the load and transfer path. Filter grade, air velocity, battery duration, alarms and chamber dimensions remain configurable and require final verification for the intended contamination-control process.
| Основной материал | Type 304 stainless steel enclosure with H14 HEPA filter and polycarbonate access panels |
|---|---|
| Толщина панели | 35–50 mm insulated fan/filter and enclosure sections |
| эффективная ширина | 700–1200 mm protected chamber width |
| Максимальная длина | Up to 1600 mm overall cart length |
| Толщина линий стали | 1.2–2.0 mm |
| Плотность ядра | 7930 kg/m³ nominal stainless steel density |
| Теплопроводимость | Approximately 16.2 W/(m·K) at room temperature |
| Поверхностная отделка | No. 4 brushed, weld-smoothed and passivated stainless steel |
| Объединенный тип | Internally welded enclosure with gel-sealed HEPA module, gasketed access doors and removable shelf rails |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Vertical or horizontal flow, HEPA or ULPA filtration, recirculating or single-pass configuration, extended battery capacity, data logging, interlocked doors and custom shelf layouts.
Planning a Laminar Flow Transfer Cart specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
