Уборка, дезинфекция и стерилизация чистых помещений

Раствор для очистки поверхностей чистых помещений

Neutral low-foam cleaning solution for removing soil, process residue, and disinfectant film from compatible cleanroom surfaces.

Low-foam surfactant action loosens oils, sticky deposits, particles, and routine maintenance soil
Neutral, dye-free, and fragrance-free configurations support cleaning of common hard non-porous cleanroom materials
Ready-to-use liquid reduces on-site dilution work and separates the cleaning step from the later disinfection step

Запрос котировки Просмотреть продукты

Введение продукции

Cleanroom Surface Cleaning Solution is a clear, colorless, near-neutral liquid for routine and restorative cleaning of floors, walls, ceilings, benches, carts, equipment exteriors, and other compatible hard non-porous surfaces. It is intended to remove non-viable contamination and chemical film; it is not presented as a disinfectant and does not replace the facility's approved antimicrobial step. The illustrated 1.5 L low-profile natural HDPE bottle has a broad stable base, low rounded shoulders, a centered wide neck, and a closed green press-to-open controlled-pour cap with a tamper-evident ring. The capped format supports measured delivery to a qualified wipe, mop head, or reservoir without adding a trigger mechanism. Alternative filtered, sterile, concentrated, and double-bagged formats can be configured for the intended cleaning workflow.

Основные характеристики

Near-neutral low-foam detergent chemistry for controlled surface cleaning

Nonionic or low-residue surfactant configurations

Clear, colorless, water-based liquid without added fragrance or dye

Ready-to-use format for repeatable application strength

0.2 micron filtered configurations for controlled environments

Removes general soil, oily marks, sticky spill residue, and disinfectant film

Wide stable HDPE bottle with closed controlled-pour dispensing cap

Capped bulk, unit-dose concentrate, sterile, and protected-bag options

Обеспокоенность клиентов продуктами

Disinfection is less reliable when dust, oil, product spill, or accumulated chemical residue remains on the surface. However, an overly foaming detergent consumes rinse time, an uncontrolled concentrate can leave film, and an unsuitable chemistry may haze plastics or damage sensitive coatings. A cleanroom cleaning program therefore separates soil removal from antimicrobial treatment, defines the correct solution strength, uses low-lint application materials, controls the amount of liquid applied, and verifies substrate compatibility. The selected pack size and closure should also limit unnecessary opening and dispensing exposure after the container enters the controlled area.

Will the detergent leave a visible film or excessive foam?A low-surfactant, low-foam ready-to-use formula limits suds and reduces the amount of rinse work. Operators apply only enough liquid to wet the target area, wipe with a qualified low-lint material, and follow the approved final-rinse step when the surface or process requires it.

Does this solution replace a disinfectant?No. The detergent removes soil and chemical residue but is not represented as an antimicrobial product. Cleaning is completed first so the separately selected disinfectant can contact the prepared surface at its defined concentration and wet-contact time.

How can dilution errors be avoided on large-area cleaning tasks?Ready-to-use bottles remove the dilution step for routine work. Where a concentrate is preferred, a premeasured unit dose is added to a defined volume of qualified water in a clean vessel, mixed according to the written procedure, and identified with its preparation and in-use limits.

Is a neutral cleaner compatible with every cleanroom surface?Neutral chemistry generally broadens material compatibility, but it does not guarantee suitability for every coating, polymer, adhesive, optical finish, or process-contact material. The proposed formula and concentration are checked on a representative area before routine use, with special attention to stress-cracked plastics and sensitive painted surfaces.

How is dispensing and cleanroom transfer controlled?A tamper-evident closed cap protects the opening during movement and allows measured pouring without a trigger assembly. Single-, double-, or triple-bag packaging can match the transfer route, while filtered or sterile presentations are selected according to area requirements. The container and closure are inspected before entry and use.

Типичные приложения

Routine cleaning of cleanroom floors, walls, ceilings, and benchesRemoval of disinfectant or sporicide residue between scheduled cyclesCleaning of compatible stainless-steel work surfaces and equipment exteriorsSoil removal from carts, cart wheels, tools, and material-transfer equipmentPre-cleaning before the approved cleanroom disinfection stepRecovery cleaning after maintenance or controlled intervention workPharmaceutical, biotechnology, and medical-device controlled areasElectronics, optics, cosmetics, and precision-manufacturing cleanrooms

Технические параметры

Cleanroom Surface Cleaning Solution is a water-based detergent formulated with a controlled level of nonionic or other low-residue surfactant. Representative cleanroom products use deionized, purified, or WFI-quality water and maintain a near-neutral pH, commonly within approximately 5.5–8.0. The surfactant lowers surface tension and breaks the bond between soil and a hard non-porous substrate so a qualified wipe or mop can carry contamination away. Ready-to-use products avoid concentration errors, while unit-dose concentrates support larger floor, wall, and ceiling programs. Filtered, sterile, and protected-bag presentations are selectable when the transfer route or cleanroom grade requires them.

Основной материал	Near-neutral low-foam surfactant solution in purified, deionized, or WFI-quality water
Толщина панели	0.9–1.4 mm nominal wall thickness for the natural HDPE primary bottle
эффективная ширина	170–210 mm typical broad body width for a 1–2 L low-profile bottle
Максимальная длина	175–215 mm typical overall height including the closed dispensing cap
Толщина линий стали	0 mm; polymer primary packaging without steel facing
Плотность ядра	Approximately 990–1010 kg/m³ at 20–25 °C for a ready-to-use aqueous solution
Теплопроводимость	Approximately 0.57–0.60 W/(m·K) near 20 °C
Поверхностная отделка	Clear, colorless liquid in a smooth natural semi-translucent HDPE bottle
Объединенный тип	Centered wide threaded neck with a hinged press-to-open controlled-pour cap and tamper-evident ring
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

1–2 L ready-to-use low-profile capped bottle5 L capped container for mop reservoirs and larger surfacesPremeasured unit-dose concentrate for controlled on-site dilutionNonionic fatty-alcohol-ethoxylate or amine-oxide surfactant systemPurified-water, deionized-water, or WFI-quality-water formulation0.2 micron filtered preparationNon-sterile filtered or terminally sterilized presentationSingle-, double-, or triple-bagged transfer package

Planning a Cleanroom Surface Cleaning Solution specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой