English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Системы распределения воздуха в чистых помещениях
Амортизатор обратного протяжения
A gravity-closing blade assembly that opens with forward fan pressure and closes when airflow stops to limit reverse movement through the duct.
- Automatic Gravity Closure
- Low-Mass Aluminum Blades
- Adjustable Start-Open Balance
- Forward-Flow Only Protection
Введение продукции
The backdraft damper is a vertically mounted rectangular frame containing horizontally pivoted aluminum blades. Forward differential pressure lifts the blades open; when the fan stops or pressure reverses, gravity returns them to the closed position. Offset pivots and optional counterweights allow the start-open pressure to be adjusted without a motor. Blade-edge and jamb seals reduce reverse leakage, while external counterweight arms remain accessible for final balancing after installation.
Основные характеристики
Gravity-assisted closure blocks reverse flow when the connected fan is idle or wind pressure changes direction.
Adjustable counterweights tune the opening threshold for the installed airflow and blade orientation.
Drainable frame profiles and corrosion-resistant aluminum suit intake, exhaust and weather-exposed openings.
Обеспокоенность клиентов продуктами
A backdraft damper must open at the available fan pressure, close reliably at zero flow and remain stable rather than fluttering in a turbulent opening.
Heavy blades consume too much fan pressure before the damper begins to open.Low-mass aluminum blades and an adjustable counterbalance reduce the required start-open differential.
Wind drives outdoor air backward through an idle exhaust branch.Gravity closure and blade-edge seals oppose reverse pressure when forward airflow disappears.
Turbulent fan discharge causes the blades to chatter against their stops.Adequate separation from the fan, balanced blade mass and optional damping weights stabilize movement.
A horizontal installation prevents gravity from returning the blades correctly.The damper orientation and airflow direction are selected so blade weight acts toward the specified closed position.
Типичные приложения
Cleanroom exhaust fan outletsOutside-air intake isolationRelief-air discharge openingsRoof and sidewall fan connectionsStandby fan backflow prevention
Технические параметры
Typical construction ranges for a vertical-mount aluminum backdraft damper are listed below.
| Основной материал | Extruded aluminum gravity blades with aluminum frame, stainless pivots and optional elastomer seals |
|---|---|
| Толщина панели | 1.0–1.5 mm hollow or formed aluminum blade wall |
| эффективная ширина | 150–1200 mm nominal clear opening width |
| Максимальная длина | Up to 1500 mm nominal frame height |
| Толщина линий стали | 1.0–1.5 mm galvanized linkage and counterweight support plates |
| Плотность ядра | Approximately 2700 kg/m³ for the aluminum blades and frame |
| Теплопроводимость | Approximately 160–205 W/(m·K) for aluminum airflow components |
| Поверхностная отделка | Natural mill-finish aluminum or clear anodized and powder-coated construction |
| Объединенный тип | Flanged rectangular frame with independently pivoted gravity blades and adjustable external counterweights |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Blade and jamb sealsAdjustable counterbalance weightsBird screen or weather louver combinationAluminum, galvanized or stainless-steel construction
Planning a Backdraft Damper specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
